Manual A.O. Smith AHD 290 (page 57 of 129) (English, German, Dutch, French)

503277

Zoom out

Zoom in

1/129

E17: Extended airow ON

At 3rd speed, there is an option of making the unit step down automatically to

the 2nd speed, after a number of hours, by adjusting to set 1. If the setpoint is

adjusted to 0, the unit will run at the 3rd speed until a lower speed has been

selected manually.

Factory setting: 0

E18: Hour

If automatic step-down at 3rd speed is in use, the number of hours at which the

unit is to operate with forced air, may be adjusted here. The setpoint may be

adjusted between 1 - 10 hours.

Factory setting: 3

E19: Extra function

If the setpoint is 1 the extra function will be activated as soon as T9 reach the

setpoint (se E2). If the setpoint is 0, the function will be out of order.

E21: TX set

In order to avoid high operating pressures in the cooling system, the system out-

put must be reduced for the remaining part of the heating period. This parameter

indicates the water temperature at which the reduction should start. It may be set

to 0-55°C.

Factory setting: 50

E23: Tmop

This value indicates the maximum permitted evaporation temperature. This pre-

vents overloading of the compressor system at high ambient

temperatures.

Adjust this value between 0-25°C.

Factory setting: 25

E25: Vent level 2

If an extended period of extraction from the building is wanted, it is possible to

change to level 2. The fan will now run until another level has been selected.

This option is used to set the speed at which the fan should run, when level 2 is

selected. Please note that this setting also sets the maximum fan speed when

running in level 1. The speed may be set to 0-100%.

Factory setting: 100

E26: Vent level 3

If extraction from the building at a specic length of time is required, it is possible

to change to level 3. The fan will now run for the set period. Thereafter the sys-

tem will return to level 2. This menu option is used to specify the speed at which

the fans should run when the set period has been chosen. Please note that this

setting also sets the maximum fan speed when running in level 1 The speed may

be set to 0-100%.

Factory setting: 100%

E27:

Available function. Must at all times be 1.

E45: dTair-set

Here it is possible to choose minimum cooling of the air, while heating the water.

The control will adjust the speed of the fan to make sure the air will be cooled at

the exact temperature chosen. In case the control needs to cool the air due to

technical reasons, the value will be controlled by the automatic function. When

requiring a higher fan speed, the value may be reduced. Remember though, the-

fan will run faster, using more energy, if the values are set to low.

Factory setting: 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of A.O. Smith AHD 290 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

A.O. Smith AHD 290 Manual

Product: