607217
15
Zoom out
Zoom in
Previous page
1/128
Next page
ENGLISH
15
Cannot access
the ZyWALL from
the LAN.
Check the cable connection between the ZyWALL and your
computer or switch. Refer to section for details.
Ping the ZyWALL from a LAN computer. Make sure your
computer’s Ethernet card is installed and functioning properly.
Also make sure that its IP address is in the same subnet as the
ZyWALL’s.
In the computer, click Start, (All) Programs, Accessories and
then Command Prompt. In the Command Prompt window, type
"ping" followed by the ZyWALL’s LAN IP address (192.168.1.1 is
the default) and then press [ENTER]. The ZyWALL should reply.
If you’ve forgotten the ZyWALL’s password, use the RESET
button. Press the button in for about 5 seconds (or until the PWR
LED starts to blink), then release it. It returns the ZyWALL to the
factory defaults (password is 1234, LAN IP address 192.168.1.1
etc.; see your User’s Guide for details).
If you’ve forgotten the ZyWALL’s IP address, you can use the
commands through the console port to check it. Connect your
computer to the CONSOLE port using a console cable. Your
computer should have a terminal emulation communications
program (such as HyperTerminal) set to VT100 terminal
emulation, no parity, 8 data bits, 1 stop bit, no flow control and
115200 bps port speed.
Cannot access
the Internet.
Check the ZyWALL’s connection to the Ethernet jack with Internet
access. Make sure the Internet gateway device (such as a DSL
modem) is working properly.
Check ge2’s status in the Status screen. Use the installation
setup wizard again and make sure that you enter the correct
settings.
Problem Corrective Action
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL ZyWALL USG 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL ZyWALL USG 300 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL ZyWALL USG 300

ZyXEL ZyWALL USG 300 User Manual - English - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info