607204
329
Zoom out
Zoom in
Previous page
1/364
Next page
Chapter 21 Troubleshooting
Cloud Storage User’s Guide
329
Make sure the Ethernet cable is connected properly to the NAS and connected to another
(Ethernet) device. Make sure the other device is turned on. If it’s connected directly to a
computer, make sure that the computer network card is working (ping 127.0.0.1 on the
computer).
Use another Ethernet cable. If you’re connecting to a Gigabit Ethernet, make sure you’re using
an 8-wire Ethernet cable.
If the problem continues, contact the vendor.
See Section on page 345 for a description of NAS LEDs.
The NAS turns off or reboots by itself.
Check the Power Management screen. This is where you configure power settings for the NAS,
including power saving, UPS, power on/off during power failure and power on/off schedule. The
NAS may be set to turn off under certain conditions.
A power failure occurred while the NAS was downloading files.
If power failure occurs during the active download period, the NAS will verify whether the
downloaded files were damaged.
If a file is corrupted, the NAS will download the file again.
If the file is intact but not completely downloaded, the NAS will resume the download task after
it restarts.
21.3 NAS Starter Utility
The NAS Starter Utility cannot discover my NAS.
Close the NAS Starter Utility and reopen it.
Check your hardware connections and make sure they are set up correctly.
Only one instance of the NAS Starter Utility can run on your computer. Make sure you close any
duplicate windows for this application.
Wait for the SYS LED to stop blinking before clicking Discover.
Confirm that the computer running the NAS Starter Utility has a network connection. See the
section on the NAS’s LAN connection for related information.
The computer running the NAS Starter Utility can only discover NASs in the same subnet. NASs
connected to the same switch or router as your NAS Starter Utility computer are usually in the
same subnet unless the router is doing subnetting or the switch is implementing VLAN.
329


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL NAS520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL NAS520 in the language / languages: English as an attachment in your email.

The manual is 13,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL NAS520

ZyXEL NAS520 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info