607204
328
Zoom out
Zoom in
Previous page
1/364
Next page
Chapter 21 Troubleshooting
Cloud Storage User’s Guide
328
Turn the NAS off and on.
If the problem continues, contact the vendor.
An HDD LED is off.
The HDD LED is off when the NAS cannot detect a hard drive in the drive bay. Replace or install a
hard drive. See Installing or replacing a hard disk.
An HDD LED is red.
Red means that the NAS detected an error on the hard drive (like a bad sector for example). The
NAS automatically tries to recover a bad sector, but the LED stays red until the NAS restarts. Even
if the hard drive still functions, it is recommended that you replace it since errors are a sign that the
hard drive may fail soon. See Installing or replacing a hard disk.
Installing or replacing a hard disk.
Do not remove or install a hard disk while the NAS is turned on. The NAS
must be turned off before you remove or install the hard disk.
1 Turn the NAS off, remove the front panel and make sure:
there is a SATA I or SATA II (3.0 Gbit/s) compatible hard disk installed.
the hard disk is installed correctly in the disk bay. Push the disk back into the NAS disk bay
until the hard disk is fitted snugly inside the NAS (see the NAS Quick Start Guide).
the hard disk could be faulty. Try a different hard drive or test the original hard disk in a
different NAS or computer.
2 If you had to replace the drive, turn on the NAS and go to the Storage screen.
If you have a RAID I volume click the Repair icon next to the new drive.
If you are using RAID 0 you will need to recreate the whole volume. All of your data is lost.
If you are using a single-disk JBOD volume, you need to create a new volume on the new
drive.
If you are using a two-disk JBOD volume, you need to create a whole new volume on both
drives.
The LAN LED (by the LAN port) is off.
328


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL NAS520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL NAS520 in the language / languages: English as an attachment in your email.

The manual is 13,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL NAS520

ZyXEL NAS520 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info