679736
13
Zoom out
Zoom in
Previous page
1/17
Next page
MC100FX-SC2/30 User’s Guide
13
DIP Switches
All DIP switches are off by default.
DIP
Switch 1
The Ethernet link is auto-negotiating when the switch is off.
Turn it on to force the Ethernet link to be up at only 100Mbps
in full duplex mode.
DIP
Switch 2
The fiber link operates in full-duplex mode when the switch is
off. Turn it on to have the fiber link operate in half-duplex
mode.
DIP
Switch 3
Turn this switch on to enable Link Loss Forwarding. A
message is sent to the Ethernet port if the fiber link goes
down (thus forcing the Ethernet link down) and vice-versa.
DIP
Switch 4
When this switch is off, the Ethernet port uses a store-and-
forward switching scheme, in which incoming data frames are
first stored in buffer memory and checked for errors before
being forwarded. Turn this switch on to have the Ethernet port
operate in pure converter mode in which the port forwards the
received data frame immediately after being received (without
error checking).
Do not turn a DIP switch on or off when a port is transmitting
or receiving data as it may cause data error or loss.
Fiber Transceiver
The MC100FX-SC2 comes with a built-in multimode fiber transceiver
with SC connector that can be used for connections of up to 2km.
The MC100FX-SC30 comes with a built-in single mode fiber
transceiver with SC connector that can be used for connections of up to
30km.
SFP transceiver modules are dust sensitive. Avoid getting dust and other
contaminants into them.
SFP transceivers are equipped with a Class 1 laser, which emits
invisible radiation. To avoid possible eye injury, do not look into an
operating fiber-optic module’s connectors. Laser radiation is also
present when the media converter is turned on.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL MC100FX-SC2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL MC100FX-SC2 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info