679736
17
Zoom out
Zoom in
Previous page
1/17
Next page
MC100FX-SC2/30 User’s Guide
17
PROBLEM POSSIBLE CAUSES AND REMEDIES
The FDX/COL
(Ethernet) LED
is off
The RJ-45 port is operating in half-duplex mode or the
Ethernet link is down. See above for possible causes
and remedies.
The LNK/ACT
(Fiber) LED is
off
Check the fiber cable connection between the media
converter and the remote device. Check that the
distance between them does not exceed limits for
single mode (MC100FX-SC30) or multi mode fiber
(MC100FX-SC2).
Check for faulty cables.
Check what duplex mode the remote device supports
and then set DIP switch 2 (off for full-duplex and on for
half-duplex).
If Link Loss Forwarding is enabled (DIP switch 3 is on),
then check if the Ethernet link is down (thereby forcing
the fiber link down).
The FDX/COL
(Fiber) LED is
off
The fiber port is operating in half-duplex mode or the
fiber link is down. See above for possible causes and
remedies.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL MC100FX-SC2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL MC100FX-SC2 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info