796886
34
Zoom out
Zoom in
Previous page
1/68
Next page
Gateway 400 User Guide | Configuration
34
5.6.3 Additional Features
5.6.3.1 Additional Features
Quagga
Quagga is an open source service that offers management of dynamic routing protocols such as
OSPF or BGP. It consists of a core component named Zebra, which applies routing information to
your system.
In addition, there are two further components (OSPF, BGP), which receive routing information from
the network and pass it on to Zebra. The use of the components named above is optional, but if you
want to use dynamic routing protocols, you will need to enable at least the zebra service and one
routing protocol service. You can enable/disable the services on this page.
To configure the services themselves you need to login via the command line interface (CLI), which
is listening on the configured ports. The default user credentials to log in are the User Name “ad-
min” and the Password “admin”. For security reasons, please change these credentials after en-
abling the appropriate services. For more information about configuring Quagga via the CLI, please
refer to the community documentation.
Zebra
Zebra is a core component, which applies routing information to your system. OSPF (Open Shortest
Path First) or BGP (Border Gateway Protocol) are used for sending and receiving the routing infor-
mation over the network. These two protocols must be activated separately before they can be
used.
5.7 Security
This screen dialog shows status information for the current security settings. The security settings
can be edited via the following menu items.
5.7.1 Firewall
5.7.1.1 Settings
Firewall
The Gateway 400 features a built-in Firewall to protect your home network and your Internet access
against unauthorized use. This firewall offers a comprehensive set of security settings to restrict In-
ternet access from the outside; it reduces the risk of hacker attacks and protects your network
against many common vulnerabilities and exposures.
The firewall of the Gateway 400 performs stateful packet inspection (SPI). Stateful inspection, also
referred to as Dynamic Packet Filtering, is a security feature which ensures that each data packet is
assigned to a specific active session. The data packets are analyzed in relation to their connection
state and stored in so-called dynamic state tables. The actual state of the data connection deter-
mines whether a data packet is forwarded or not. All data packets which do not match the defined
criteria, or which are likely to be part of a DoS attack, are discarded. With its SPI technology, the fire-
wall of the Gateway 400 is superior to conventional packet filter firewalls and therefore better suit-
ed for mission critical applications.
“Port Forwarding” on page 36 describes how to define exceptions for individual applications and
how to release the data traffic for these applications.
Enable IPv4 SPI: This option cannot be disabled.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info