796886
33
Zoom out
Zoom in
Previous page
1/68
Next page
Configuration | Gateway 400 User Guide
33
5.6.2 USB
The Gateway 400 provides a USB host controller with two USB 2.0 interfaces for connecting and
sharing USB devices in a network. The network devices can be attached to the connected printer(s)
or storage device(s) via the built-in file, FTP, media or printer server.
This menu item gives you an overview of the attached USB devices; it also indicates which steps are
necessary to share data content or enable the services of the respective USB device.
Supported standards: USB 1.1 and USB 2.0.
Supported file systems: FAT12, FAT16, FAT32 and NTFS.
5.6.2.1 Devices
Here you can see the status of each attached USB device (USB stick, USB hard drive, USB printer, USB
modem, etc.). You can connect up to 16 USB devices via an additional USB hub (with its own power
supply).
After connecting the USB device to the USB port of your Gateway 400 and clicking Refresh, the USB
device will appear in the table Current USB Device Status.
Select the Enable USB Host Controller check box to make the attached USB devices available in your
network.
5.6.2.2 FTP Server
Here you can share your USB device on the network via an FTP server. In this way, the files that are
located on the attached USB mass storage device will be accessible on your local network or the In-
ternet. First, set up individual user profiles and select the directories and folders whose contents you
want to share. For each user profile, you can set different passwords and directories/folders. Once
you have set up the profiles and enabled the FTP server, you can access the directories/folders by
entering the following URL in your web browser or Windows Explorer: ftp://192.168.100.1
TCP Port: Port used for FTP connections. Default = 21
Maximum number of connections: Number of connections that can access the FTP server concur-
rently.
Idle Timeout: Timeout for automatic logout from idle FTP connections.
Remote Access: (De)activate connections to the FTP server from the Internet.
Zone: Select from which zone the FTP server can be accessed remotely. This selection is
only available if Remote Access has been enabled.
Attention
To prevent data loss on a USB mass storage device or even a failure of your USB device,
always click on “Remove” before disconnecting the USB mass storage device from your
device!
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info