796886
16
Zoom out
Zoom in
Previous page
1/68
Next page
Gateway 400 User Guide | Installation
16
3 Installation
Step 1 Connect the Gateway 400 to the mains.
Plug the supplied power cable into the connector on the rear panel of the Gateway 400 and insert
the plug into a 230V outlet. Turn on the gateway by pressing the rocker switch next to the power
cable connector.
The PWR LED starts flashing, first in red and then in green. The Gateway 400 will be operational after
approx. 2 minutes.
Step 2 Network access.
Option 1: DSL connection.
Take the gray DSL connection cable (TAE on RJ45) and plug the RJ45 connector into the VDSL/
ADSL socket of the Gateway 400. Plug the TAE connector into the TAE socket.
Option 2: WANoE connection.
Connect the modem according to the manufacturer’s instructions. Take a network cable (mo-
dem accessory) and plug the RJ45 connector into the LAN socket on the modem and the other
RJ45 connector into the ETH socket on the Gateway 400.
Step 3 Network device connection.
Take the yellow cable (network cable) and plug the RJ45 connector of the yellow cable into the LAN
1 or LAN 2 socket on the Gateway 400. Plug the other RJ45 connector into the corresponding socket
on the network device to be connected. Wait until the LAN LED begins to light up in green.
Note
The synchronization process between the Gateway 400 and the DSL network may take
several minutes to complete. After successful synchronization, the appropriate VDSL or
ADSL LED will light up. If the synchronization process fails to complete after about 10
minutes, contact the customer service of your Internet service provider (ISP).
Note
The individual LAN sockets use the following network addresses:
192.168.100.2 to 192.168.100.254 for network devices connected to the LAN 1 socket.
192.168.200.2 to 192.168.200.254 for network devices connected to the LAN 2 socket.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info