796886
15
Zoom out
Zoom in
Previous page
1/68
Next page
Your Gateway 400 | Gateway 400 User Guide
15
2.3.1 Restarting the Gateway 400
Restarting the Gateway 400 will not affect the existing settings and configurations.
Press the reset switch (RES) for a short time (approx. 2 seconds). After about 10 seconds, the Power
LED lights up red for about 30 seconds. It then turns green again. After about 2 minutes, the Gate-
way 400 will be operational again.
2.3.2 Resetting the Gateway 400 to the Factory Default Settings
If you want to completely reconfigure the Gateway 400, or if the owner of the Gateway 400 chang-
es, you can delete all the settings made by restoring the factory default settings.
Proceed as follows to reset the Gateway 400 to the factory default settings:
1. Press the reset button for about 10 seconds until the Power LED turns red and flashes.
2. Then release the reset switch.
The Power LED lights up red for about 30 seconds. It then turns green again.
After about 2 minutes, the Gateway 400 will be operational again.
3. As described in Chapter 4, Setup, on page 20, you must now set up and reconfigure the Gate-
way 400 or load the previously saved configuration (Chapter 5.8.5, Save Configuration, on page
42) or configure Internet access using the automatic Carrier Detection (Chapter 4.2, Carrier
Detection, on page 20).
Attention
If you press the reset switch for too long, other reset actions will be initiated, which
could also result in the permanent deletion of important data. See "Reset Switch" on
page 14.
Attention
Resetting the device to the factory default settings will cause all custom settings to be
lost. You should therefore save your configuration (as described in Chapter 5.8.5, Save
Configuration, on page 42) before resetting the device.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ZyXEL Gateway 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ZyXEL Gateway 400 in the language / languages: English as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ZyXEL Gateway 400

ZyXEL Gateway 400 Quick start guide - German - 16 pages

ZyXEL Gateway 400 User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info