Injuries to your legs can occur if the pedal spacing (Q-fac-
tor) is too small or too large. There is a risk that riders will
have problems with the crankset installed.
Should riding feel uncomfortable due to the pedal spacing,
seek advice from the manufacturer and have your crankset
changed, if necessary.
Avoid vibrations
Incorrect installation, wear and overloading (e.g. electric motor touching the ground when riding
over bumps or kerbs) or loose parts can cause the electric motor to no longer run smoothly.
- Use the bike only on approved surfaces.
- Check the drive unit for backlash-free and smooth running before every trip.
- If you hear grating or grinding noises or discover obvious signs of
damage, contact a dealer and have the bike repaired. Using the bike on the road or off-road causes
vibrations to be transmitted from the ground to your body.
- Use the bike only on approved surfaces.
Vibration
When used for the intended purpose, the values of 2.5 m/s² for the hand/arm system and 0.5 m/s²
for the whole body are not exceeded.
If you feel unwell due to extreme vibrations caused by changing ground, adapt your speed accord-
ingly and use the function of the suspension forks!
Noise
The A-weighted emission sound pressure level does not exceed 70 dB(A).
Avoid illnesses
Long and frequent sitting on the saddle may lead to prostate disease in men.
- If necessary, fit a saddle suitable for female/male ergonomics.
- Go to medical check-ups, if necessary.
Avoid dehydration from cycling
Cycling is a strenuous physical activity.
- Ensure an adequate supply of fluids at all times.
