804021
52
Zoom out
Zoom in
Previous page
1/57
Next page
52
6. Torque specifications
The correct torque of the screws is very important for safety. Always tighten the fasteners to the correct tightening torque. Should the instructions in this manual not
match those from the component manufacturer, consult a qualified bike mechanic or the manufacturer's customer service department for clarification. Screws that
are too tight can stretch and deform. Screws that are too loose can move and wear.
Both faults can lead to a sudden failure of the screw. Always use a correctly calibrated torque wrench to tighten important fasteners on your bike. Follow the
manufacturer's instructions on the correct use of the torque wrench closely to obtain accurate results.
Headset lock nut thread
16-24 Nm (142-212 in-lb)
Brake calliper bracket on frame (lateral/dual)
8-9.5 Nm (70-85 in-lb)
Stem expander bolt (spring type)
17-22 Nm (150-195 in-lb)
Brake calliper bracket on soldered linear cable/cantilever
5-7 Nm (44-60 in-lb)
Handlebar clamping screw (spring type)
17-22 Nm (150-195 in-lb)
Brake pad (threaded bolt, dual pivot/lateral pull)
5-7 Nm (44-60 in-lb)
Stem clamping screw (threadless)
13.5-16 Nm (120-144 in-lb)
Brake pad (smooth bolt)
8-9 Nm (70-78 in-lb)
Compression cap
2-3 Nm (20-26 in-lb)
Brake cable locking screw (linear pull)
6-8 Nm (53-69 in-lb)
Stem front panel screws
13.5-19 Nm (120-168 in-lb)
Brake cable locking screw (lateral pull/dual pivot)
6-8 Nm (53-69 in-lb)
Brake calliper arm (double pin)
8-9.5 Nm (70-85 in-lb)
Pedals
34.5-40 Nm (307-354 in-lb)
Lateral pull/dual pivot brake pad screw
5-7 Nm (44-60 in-lb)
Crank arm
45-50 Nm (398-442 in-lb)
Self-supporting straddle wire screw 5 x 0.8 thread
4-5 Nm (35-43 in-lb)
Brake calliper wires linear brake
5.5-8.5 Nm (50-75 in-lb)
Axle nuts
30-42 Nm (260-372 in-lb)
Brake levers (MTB type)
6-8 Nm (53-69 in-lb)
Brake levers (drop-bar type)
6-8 Nm (53-69 in-lb)
Seat post bolt
4-6.5 Nm (36-60 in-lb)
Seat rail screw
18-34 Nm (160-300 in-lb)
Mudguard screws
6-9 Nm (53-78 in-lb)
Mudguard bracket screws
2.5-4 Nm (25-35 in-lb)
Gearshift levers
6-8 Nm (53-70 in-lb)
Rear derailleur screw plug
8-10 Nm (70-86 in-lb)
Basic clip screws
2.5-4 Nm (25- 35 ft-lb)
Rear derailleur cable locking screw
4-5 Nm (35-45 in-lb)
Retaining screws
2.5-4 Nm (25-35 ft-lb)
Rear derailleur pulley screw
3-4 Nm (27-36 in-lb)
Rod screws
2.5-4 Nm (25-35 ft-lb)
Brake disc rotor on hub
4-7 Nm (36-60 in-lb)
Disc brake calliper bracket
6-9 Nm (52-84 in-lb)
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zundapp 2022 Alemeen - Allgemein - General at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zundapp 2022 Alemeen - Allgemein - General in the language / languages: English as an attachment in your email.

The manual is 4.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zundapp 2022 Alemeen - Allgemein - General

Zundapp 2022 Alemeen - Allgemein - General User Manual - German - 56 pages

Zundapp 2022 Alemeen - Allgemein - General User Manual - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info