5 TRM-PAN
Effect ranging from tremolo to auto-panpot.
EDIT 1
EDIT 2 EDIT 3 EDIT 4
TAP BYPASS
DepthWidth Rate [TAP] Clip
WET
MUTE
1 - 11 1 - 10 1 - 50 0 - 10
6 CHO+REV
This is an in-series combination of chorus and reverb.
EDIT 1
EDIT 2 EDIT 3 EDIT 4
TAP BYPASS
Reverb Mix Reverb Time Chorus Depth Chorus Mix
WET
MUTE
1 - 11 1 - 30 1 - 30 0 - 99
7 FLG+REV
Parameters are the same as for "8 FLG/REV".
This is an in-series combination of flanger and reverb.
8 FLG/REV
This is a parallel combination of flanger and reverb. The left channel carries the flanger effect and
the right channel the reverb effect.
EDIT 1
EDIT 2 EDIT 3 EDIT 4
TAP BYPASS
Reverb Mix Reverb Time Flanger Rate [TAP] Flanger Feedback
WET
MUTE
1 - 11 1 - 30 1 - 50 0 - 30
Control knob
Parameter
Setting range
Description
Adjusts the auto-
panning depth.
Adjusts the modulation
cycle.
Adjusts the LFO
waveform clip pattern
that controls the
modulation.
Turning the control
counterclockwise gives
tremolo. Turning it
clockwise gives auto-
panning with a wider
spread.
Control knob
Parameter
Setting range
Description
Adjusts the reverb
duration.
Adjusts the chorus
depth.
Adjusts the chorus mix
ratio.
Adjusts the reverb mix
ratio.
Control knob
Parameter
Setting range
Description
Adjusts the reverb
duration.
Adjusts the flanger
fluctuation cycle.
Adjusts the flanger
feedback.
Adjusts the reverb mix
ratio.
TAP
ON
TAP
ON
S/R
S/R
S/R
1 VOCODER
This effect lets you use a mike connected to the MIC IN jack to control the signal from a synthesizer
supplied to the INPUT L jack.
EDIT 1
EDIT 2 EDIT 3 EDIT 4
TAP BYPASS
Band/Attack Chorus Mix Distortion Sens
WET
MUTE
WET
MUTE
1 - 11 0 - 10 0 - 10 1 - 30
2
RING-MOD
This is a ring modulator with short delay.
EDIT 1
EDIT 2 EDIT 3 EDIT 4
TAP BYPASS
Delay Mode
Frequency EQ Low
EQ High
1 - 11 1 - 50 -12 - 12 -12 - 12
Control knob
Parameter
Setting range
Description
Control knob
Parameter
Setting range
Description
3 TIME TRIP
This effect varies the delay time according to the intensity of the input signal.
EDIT 1
EDIT 2 EDIT 3 EDIT 4
TAP BYPASS
Depth Sensitivity Feedback Feedback Polarity
WET
MUTE
1 - 11 1 - 50 0 - 30 -1, 1
Adjusts the number of
Vocoder bands and the
response speed.
1 - 5: 18 bands, 6 - 11:
10 bands (lower values
mean faster response)
Adjusts the chorus mix
ratio.
Adjusts the modulation
frequency.
Adjusts the distortion. Adjusts the Vocoder
sensitivity.
Adjusts the EQ Low
cut/boost amount.
Adjusts the EQ High
cut/boost amount.
Switches the delay
effect.
Control knob
Parameter
Setting range
Description
Adjusts the delay time
change sensitivity.
Adjusts the amount of
feedback.
Adjusts the feedback
polarity. -1: reverse
phase, 1: normal phase
Adjusts the delay time
change range.
S/R