533782
179
Zoom out
Zoom in
Previous page
1/184
Next page
ZOOM MRS-802 Ver 2.0
7
Creating a CD using the disc-at-once method
The MRS-802 Version 2.0 offers two ways of creating an
audio CD from an album. The track-at-once method
inserts blank gaps between tracks on an audio CD, while
the disc-at-once method writes tracks continuously
without gaps. Using disc-at-once, you can create a non-
stop disc or a disc of a live performance that allows
skipping by song units. For both methods, finalizing is
carried out automatically at the end, so adding material to
the CD later is not possible. The characteristics of track-
at-once and disc-at-once are described in detail below.
Track-at-once (TAO)
The master tracks of projects registered in the album
are written to the CD one by one, while inserting gaps
between them. When a CD written with track-at-once
is played on a CD player, a mute section of two seconds
follows each track. This method is suitable for creating
a regular music CD where each track is separated by
blanks.
Disc-at-once (DAO)
The master tracks of projects registered in the album are
written to the CD in a single operation without gaps.
When a CD written with disc-at-once is played on a CD
player, the disc plays through without interruption,
because the multiple tracks are joined seamlessly.
If necessary, you can use marks as PQ subcode
information (indicating track start/end points and other
information) to divide a single project into multiple
tracks for creating the audio CD. This is convenient to
make a CD of a continuous live performance where the
listener can still jump to specific songs.
HINT
If you burn the CD with disc-at-once, but still want to have
blanks between specific songs, you should add a blank
portion to the master track of each respective project.
Because the MRS-802 Version 2.0 lets you select
between track-at-once (TAO) and disc-at-once (DAO) for
writing the audio CD, the procedure for creating an audio
CD by album changes as follows.
HINT
You can include playlist information created with the
sequence play function in the album (
P.10).
NOTE
Before starting the procedure, use the trimming function on
the V-takes to be used as source material.
1.
Insert a CD-R/RW disc into the integrated
CD-R/RW drive.
Use a blank CD-R/RW disc or a CD-RW disc that has
been completely erased.
2.
Verify that the V-takes you want to use for
the audio CD are selected for the master
tracks of the projects.
3.
From the main screen, press the [CD-R/
RW] key in the display section.
The CD-R/RW menu appears.
4.
Verify that “CD-R/RW AUDIO CD” is shown
on the display and press the [ENTER] key.
The display indication changes as follows.
5.
Use the cursor left/right keys to bring up
the indication “AUDIO CD ALBUM” on the
display, and press the [ENTER] key.
In this condition, you can select the write method.
About track-at-once and disc-at-
once
Creating an audio CD by album
AUDIO CD
AUDIO CD
BURN CD
BURN CD
ALBUM
ALBUM
TYPE:DAO
TYPE:DAO
MRS802v2(E).fm 7 ページ 2004年5月27日 木曜日 午後5時59分
179


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info