533782
143
Zoom out
Zoom in
Previous page
1/184
Next page
Appendix
ZOOM MRS-802
143
•For each channel of the mixer, make sure that the
REVERB SEND or CHORUS/DELAY SEND parameter
is turned on. If it is on, make sure that the send level is
raised ( p. 72).
Problems with the rhythm section
Cannot hear the rhythm pattern play back
Make sure that the [DRUM] status key is lit in green.
Make sure that the [DRUM] fader is raised. If the fader is
already raised, lower it and then raise it once more.
Make sure that you have not selected a blank rhythm
pattern (pattern name "EMPTY").
Cannot hear the rhythm song play back
In the case of a new project, all rhythm songs will be
empty, so you will hear no sound. Either create a new
rhythm song, or load a project for which a rhythm song
has already been created.
When using Control Change signals sent from an external
MIDI device, the drum kit volume may be lowered. Set
the MIDI channel for the drum kit to OFF or check the
setting at the external MIDI device.
Cannot record or edit a rhythm pattern/
rhythm song
When the [DRUM] key is out or blinking, it is not possible
to record or edit a rhythm pattern or rhythm song. Press
the [DRUM] key to make the key light.
If the display indicates "FULL", this means that you have
used up the rhythm section memory. Please delete
unneeded rhythm patterns.
Sounds recorded in the rhythm pattern do
not play
Sounds that exceed the maximum polyphony will not be
played. Either delete some of the other notes that have
already been recorded ( p. 93), or stay within the
maximum polyphony when you record.
Problems with MIDI
The drum kit of the MRS-802 cannot be
played from an external MIDI device
Make sure that a MIDI cable is correctly connected from
the MIDI OUT connector of the external device to the
MIDI IN connector on the MRS-802.
Make sure that the MIDI send channels of the external
device match the MIDI receive channels for the drum kit
at the MRS-802.
Cannot synchronize with an external MIDI
device
Make sure that a MIDI cable is correctly connected from
the MIDI OUT connector of the MRS-802 to the MIDI IN
connector of the external device.
At the MRS-802, make sure that output is enabled for the
Timing Clock, Song Position Pointer, and Start/Stop/
Continue messages ( p. 130).
Make sure that the external MIDI device is set to receive
the Timing Clock and synchronize to it.
Make sure that the external MIDI device is in playback
mode.
Cannot load SMF from CD-ROM or CD-R/
RW disc
Make sure that the SMF is Format 0 and that the file name
and extension are appropriate.
Files written to a CD-R/RW disc in an open session will
not be recognized. Close the session and then try the load
process again.
Cannot play SMF
Make sure that SMF output is set to "ON" (SMF playing
information is output from the MIDI OUT connector)
( p. 132).
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info