533782
142
Zoom out
Zoom in
Previous page
1/184
Next page
Appendix
ZOOM MRS-802
142
Troubleshooting
If there are problems during operation of the MRS-802,
check the following points first.
Problems during playback
No sound, or sound is very weak
Check the connections to your audio system, and the
volume of your audio system.
Make sure that the status keys in the mixer section are lit
in green and that the faders are raised. If a key is out, press
the it to make it light up in green.
If a scene with the volume lowered has been assigned to a
mark, the volume will automatically be lowered when that
mark is reached. Delete the scene that is assigned to the
mark ( p. 76).
The recorder will not operate when the [DRUM] key is lit.
Press the [EXIT] key so that the [DRUM] key goes out.
Operating the fader does not affect the
volume
On channels for which stereo link is turned on, the fader
of the even-numbered channel will have no effect. Either
turn stereo link off ( p. 73), or operate the fader of the
odd-numbered channel.
The display indicates "Don't Play" and
playback is not possible
The recorder will not operate in the current screen. Press
the [EXIT] key several times to switch to the main screen.
No sound from input signal, or sound is
very weak
Make sure that the [INPUT 1]/[INPUT 2] key is lit.
Make sure that the respective [INPUT] control is raised.
Make sure that the [REC LEVEL] control is raised. If it is
raised, temporarily turn it down and then up again.
The indication "STOP RECORDER" is
shown on the display, and operation is
not possible.
The current operation is not possible while the recorder is
operating. Press the STOP [P] key to stop the recorder.
Problems during recording
Cannot record on a track
Make sure that you have selected a recording track.
Check whether you have run out of free space on the hard
disk ( p. 125).
Recording is not possible if the project is write-protected.
Either turn protect off ( p. 127), or use a different
project.
The signal from an instrument or
microphone connected to the INPUT 1
jack is not input
When something is connected to both the INPUT 1 jack
and the GUITAR/BASS jack, the GUITAR/BASS jack
has priority.
The recorded sound is distorted
Check whether the input sensitivity setting ([INPUT
control) and recording level setting ([REC LEVEL]
control) are appropriate.
•Lower the fader so that the 0 (dB) dot of the level meter
does not light.
If the EQ gain of the track mixer is set extremely high, the
sound may be audibly distorted even if the fader is
lowered. Set the EQ to an appropriate value.
Problems with effects
Insert effect does not apply
Make sure that the [BYPASS/TUNER] key is out.
Make sure that the insert effect is sent to the desired
location ( p.101).
Send/return effect does not apply
Make sure that the [CHORUS/DELAY] or [REVERB]
key is lit. If it is out, press the key several times to make it
light.
142


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-802 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-802

Zoom MRS-802 User Manual - German - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info