533781
117
Zoom out
Zoom in
Previous page
1/148
Next page
Reference [Other Functions]
ZOOM MRS-8
117
Changing the SD card
The SD card should normally only be removed or
inserted while the MRS-8 is turned off. However, by
using the following procedure, the SD card can be
removed or inserted while the MRS-8 is on.
NOTE
If the SD card is changed without following the procedure
below and while the MRS-8 is on, data may be permanently
destroyed.
1.
From the main screen, press the [SYSTEM/
UTILITY] key in the display section.
The indication “SYSTEM PROJECT” appears on the
display.
2.
Use the cursor left/right keys to bring up
the indication “SYSTEM CARD” on the
display, and press the [ENTER] key.
The menu for various SD card functions appears.
3.
Verify that the indication “CARD
EXCHANGE” is shown on the display and
press the [ENTER] key.
If currently a SD card is inserted in the MRS-8, the
indication “CARD Exist” is shown.
While this screen is being shown, the SD card can be
changed.
4.
Replace the SD card.
For information on how to remove the SD card, see page
13. When the card is removed, the display indication
changes to “CARD NotExist”.
Depending on the type of SD card that was inserted,
operation changes as follows.
SD card not ready for use in MRS-8 was
inserted
The indication “FORMAT SURE?” appears on the
display. When you press the [ENTER] key at this point,
the SD card will be formatted (initialized) and the data of
all projects that were handled up to this point will be
saved on the card (except for audio data).
When the formatting and saving process is completed, the
main screen appears.
HINT
If you cancel the format by pressing the [EXIT] key, the
indication “CARD NotExist” appears again. In this case, the
unit operates as if no card were inserted.
SD card already formatted in MRS-8 was
inserted
The indication “LoadData <-ENT->” appears on the
display. When you press the [ENTER] key twice at this
point, the project with the lowest number stored on the
SD card will be loaded.
You can save all project data up to this point (except audio
data) on the new card. To do this, use the cursor left/right
keys when “LoadData” is displayed to bring up the
indication “SaveData” and press the [ENTER] key. In this
condition, you can select the copy target project number.
Turn the dial to select the number and press the [ENTER]
key twice. The data are saved, and then the project is
loaded.
CARD
CARD
EXCHANGE
EXCHANGE
CARD
CARD
Exist
Exist
CARD
CARD
NotExist
NotExist
MRS-8(E).book 117 ページ 2004年7月30日 金曜日 午後5時24分
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-8 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-8

Zoom MRS-8 User Manual - German - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info