533781
116
Zoom out
Zoom in
Previous page
1/148
Next page
Reference [Other Functions]
ZOOM MRS-8
116
Switching the level meter
display type
In the default condition of a project, the level meter below
the display indicates the level of the signal after passing
through the faders (post-fader). If required, you can
change the setting so that the signal before passing
through the level faders (pre-fader) is shown. To do this,
proceed as follows.
1.
From the main screen, press the [SYSTEM/
UTILITY] key in the display section.
The indication “SYSTEM PROJECT” appears on the
display.
2.
Use the cursor left/right keys to bring up
the indication “SYSTEM LVL MET” on the
display, and press the [ENTER] key.
The current level meter setting will be displayed.
The settings have the following meaning.
POST
The meter shows the level of the signal after passing
through the faders.
PRE
The meter shows the level of the signal before passing
through the faders.
3.
Turn the dial to change the setting.
4.
When the setting is complete, press the
[EXIT] key repeatedly to return to the main
screen.
Adjusting the display
contrast and backlight
You can adjust the display contrast and turn the backlight
on and off. To do this, proceed as follows.
1.
From the main screen, press the [SYSTEM/
UTILITY] key in the display section.
The indication “SYSTEM PROJECT” appears on the
display.
2.
Use the cursor left/right keys to bring up
the indication “SYSTEM LCD” on the
display, and press the [ENTER] key.
A display related item can be selected.
3.
Use the cursor left/right keys to select
“LIGHT” (backlight on/off) or CONTRAST
(adjust display contrast), and press the
[ENTER] key.
When LIGHT was selected
Turn the dial to set the backlight to ON or OFF.
When CONTRAST was selected
Turn the dial to set the contrast in the range from 1 to 8.
4.
When the setting is complete, press the
[EXIT] key repeatedly to return to the main
screen.
LVL MET
LVL MET
POST
POST
LCD
LCD
LIGHT
LIGHT
LIGHT
LIGHT
ON
ON
CONTRAST
CONTRAST
1
MRS-8(E).book 116 ページ 2004年7月30日 金曜日 午後5時24分
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-8 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-8

Zoom MRS-8 User Manual - German - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info