533781
110
Zoom out
Zoom in
Previous page
1/148
Next page
Reference [MIDI]
ZOOM MRS-8
110
You can specify whether Song Position Pointer messages
will be transmitted. Song Position Pointer is a MIDI
message that indicates the current position as a beat/clock
count from the start. Normally it is used in conjunction
with Timing Clock.
Refer to steps 1 – 3 of “Basic procedure” to bring up the
indication “MIDI SPP” on the display. Then press the
[ENTER] key and turn the dial to select one of the
following settings.
ON (Transmission on)
MIDI Song Position Pointer messages will be transmitted
when a locate operation is performed on the MRS-8
(default setting).
OFF (Transmission off)
Song Position Pointer messages will not be transmitted.
You can specify whether Start/Stop/Continue messages
will be transmitted. Start/Stop/Continue are MIDI
messages that indicate the transport status of a device.
Normally these messages are used in conjunction with
Timing Clock.
Refer to steps 1 – 3 of “Basic procedure” to bring up the
indication “MIDI COMMAND” on the display. Then
press the [ENTER] key and turn the dial to select one of
the following settings.
ON (Transmission on)
The appropriate Start/Stop/Continue message will be
transmitted when the MRS-8 stops or begins running
(default setting).
OFF (Transmission off)
Start/Stop/Continue messages will not be transmitted.
You can specify whether MIDI Time Code (MTC)
messages used for synchronization will be transmitted.
Refer to steps 1 – 3 of “Basic procedure” to bring up the
indication “MIDI MTC” on the display. Then press the
[ENTER] key and turn the dial to select one of the
following settings.
24 (24 frames/second)
25 (25 frames/second)
29.97nd (29.97 frames/second, non-drop)
30nd (30 frames/second, non-drop)
When the MRS-8 is running, MTC messages with the
specified frame rate are sent out.
OFF (Transmission off)
MTC messages will not be transmitted.
When using MTC to synchronize MIDI devices, the
MRS-8 always functions as MTC master. Set up the other
device to operate as MTC slave which receives MTC
messages and functions accordingly.
An example for synchronizing the MRS-8 with a
synthesizer is shown below.
The frame rate setting (24, 25, 29.97nd, 30) must always
be matched at the master and slave side. Otherwise
correct synchronization is not possible.
HINT
If you transmit MTC as well as other MIDI messages from the
MRS-8, synchronization may become unstable. When
transmitting MIDI Time Code (MTC) messages, transmission
of other messages should be turned off.
Turning Song Position Pointer
messages on or off
Turning Start/Stop/Continue
messages on or off
SPP
SPP
ON
ON
COMMAND
COMMAND
ON
ON
Turning MIDI Time Code (MTC)
messages on or off
MTC
MTC
OFF
OFF
MIDI OUT
connector
MIDI
IN
MTC master
Sequencer
MTC slave
MRS-8
MTC
MRS-8(E).book 110 ページ 2004年7月30日 金曜日 午後5時24分
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-8 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-8

Zoom MRS-8 User Manual - German - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info