Manual Zoom MRS-8 (page 109 of 148) (English)

533781

109

Zoom out

Zoom in

1/148

Reference [MIDI]

ZOOM MRS-8

109

of the song).

• COMMAND

Turn Start/Stop/Continue message transmission on/off.

• MTC

Turn MIDI Time Code transmission on/off.

NOTE

Control Change transmission is always enabled, except

when the drum kit/bass program send channel is set to off.

Press the [ENTER] key to display the

setting of the selected item, and turn the

dial to change the setting.

For details on each item, refer to the following

explanation.

When you have ﬁnished making settings,

press the [EXIT] key repeatedly to return to

the main screen.

You can specify the MIDI channels for the drum track

and bass program.

Refer to steps 1 – 3 of “Basic procedure” to bring up the

indication “MIDI DRUM CH” or “MIDI BASS CH” on

the display. Then turn the dial to select one of the

following settings.

•1 – 16CH

Select one of MIDI channels 1 – 16 (default: DRUM

CH=10CH, BASS CH=9CH)

• OFF

Channel messages (Note On/Off, Control Change etc.)

for the drum kit or bass program will not be sent.

If you specify a MIDI channel (1 – 16), hitting a pad of

the MRS-8 or playing back a rhythm pattern or rhythm

song will cause the drum/bass track playing information

to be transmitted as Note On/Off messages in the selected

channel.

HINT

By selecting the same channel for the drum kit and bass

program, the playing information can be sent together on a

single channel via the MIDI OUT connector.

This setting speciﬁes whether the MIDI synchronization

message Timing Clock will be transmitted.

Refer to steps 1 – 3 of “Basic procedure” to bring up the

indication “MIDI CLOCK” on the display. Then press the

[ENTER] key and turn the dial to select one of the

following settings.

• ON (Transmission on)

Timing Clock information will be transmitted when the

MRS-8 is running (default setting).

• OFF (Transmission off)

Timing Clock information will not be transmitted.

The Timing Clock information is derived by dividing a

quarter note by 24. When Timing Clock is on, the clock

signal will calculated based on the tempo of the rhythm

pattern/rhythm song that is playing.

In order for the external MIDI device to play back in

synchronization at an appropriate tempo, you will need to

specify the tempo of the rhythm pattern/rhythm song at

the MRS-8. To synchronize the measure indication at the

MRS-8 and the MIDI device, the time signature setting at

both devices must be matched.

NOTE

Timing Clock information will be transmitted even if the

drum/bass track is muted.

HINT

• When using MIDI Timing Clock messages transmitted from

the MRS-8 to synchronize the transport locate operation at

the external MIDI device, you should also turn on transmission

for Song Position Pointer and Start/Stop/Continue messages

in addition to Timing Clock.

• If you transmit Timing Clock together with Note On/Off or

MTC information from the MRS-8, synchronization may

become unstable. When transmitting Timing Clock,

transmission of these messages should be turned off.

Setting the drum kit/bass

program MIDI channel

DRUM CH

10CH

Turning Timing Clock

messages on or off

CLOCK

MRS-8(E).book 109 ページ２００４年７月３０日　金曜日　午後５時２４分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-8 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-8

Zoom MRS-8 User Manual - German - 148 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zoom MRS-8 Manual

Product: