533778
11
Zoom out
Zoom in
Previous page
1/33
Next page
The track mixer incorporates a send/return effect with reverb/delay/chorus. The signal flow when
using the send/return effect is as follows.
The intensity of the send/return effect can be adjusted for each track individually by adjusting the
send level. Raising the level causes the effect to be more pronounced for that track. This example
shows how to select the algorithm for the send/return effect and how to adjust the send level.
Setting the algorithm and parameter for the send/return effect
1.
While the main screen is shown, press the [SEND/RETURN] key.
The [SEND/RETURN] key lights up and the send/return effect is activated. The menu for
selecting the algorithm for the send/return effect appears on the display.
For the send/return effect, you can select a reverb, delay, or chorus type algorithm. Each type has
one parameter (an element for adjusting the action of the effect) that allows a more finely graded
adjustment than the send level. Available algorithms and parameters are listed in the table on page
22 – 23.
HALL 0
Setting value
A
lgorithm
312 4
MASTER
Send/return
effect
SEND
LEVEL
Using the send/return effect
4-3
ZOOM MRS-4
21
4.
Use the [PARAMETER/VALUE] keys to set the track parameters.
The left/right [PARAMETER/VALUE] keys select the parameter, and the up/down
[PARAMETER/VALUE] keys change the setting value.
When STL (stereo link) is ON, all parameters for tracks 1 and 2, and tracks 3 and 4 are
linked, except for the V-take selection.
The FADER parameter is only for display and cannot be changed. (When the respective
fader is moved, the indication changes.)
HIEQ ON
HIG 0
HIG 0 HIG 1
ZOOM MRS-4
20
LOEQ
Switches low EQ on or off
LOG
Adjusts low EQ boost/cut from -12 (dB) to +12
(dB). This parameter is only shown when LO EQ is
set to ON.
LOF
Selects the frequency for low EQ boost/cut. This
parameter is only shown when LO EQ is set to ON.
Controls the stereo link function for using tracks 1/2
and 3/4 in a stereo configuration. (For details, see
page 39.)
Track parameters and settings (continued)
ON/OFF
FADE
Shows the current fader position numerically
(display only).
0 – 127
-12 – 12
63 – 2000Hz
SEND
Determines whether the signal from the respective
channel (track) is sent to the send/return effect.
ON/OFF
SLVL
Adjusts the level of the signal sent to the send/return
effect. This parameter is only shown when SEND is
set to ON.
0 – 100
STL
T
x-y
ON/OFF
Selects the V-take to be used for the respective
track.
*
x is the track number and y is the V-take number.
(For details, see page 28.)
x=1 – 4
y=1 – 8
PAN
LO EQ
ON/OFF
LO EQ
GAIN
LO EQ
FREQUENCY
FADER
SEND
ON/OFF
SEND
LEVEL
STEREO
LINK
V TAKE
PAN
Adjusts panning (left/right position) of the signal
from the respective track. When STL (stereo link) is
set to ON, this adjusts the left/right volume balance
of the stereo tracks.
L50 – 0 – R50
Basic Operation
Basic Operation
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-4 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-4

Zoom MRS-4 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info