533778
10
Zoom out
Zoom in
Previous page
1/33
Next page
ZOOM MRS-4
19
The length of the "WAIT" interval depends on setting conditions.
6.
To listen to the recording, use the ZERO [
U
] key to return to the beginning of the
song, and then press the PLAY [
R
] key.
The recorded tracks 1 and 2 are played back. If necessary, adjust faders 1 and 2 for optimum
balance.
7.
To stop playback, press the STOP [
P
] key.
8.
Press the status key 2 so that the key is lit in green.
You can record more tracks in the same way.
When recording of tracks 1 – 4 is completed, you can adjust the level, EQ, and panning of each
track to create the final stereo mix. This process is called mixdown.
When performing mixdown on the MRS-4, you can either record the completed song on an
external master recorder, or on unused V-takes in the MRS-4. The example in this section explains
how to record on an external master recorder.
Connect the master recorder and make other preparations as follows.
1.
Connect a master recorder (MD or DAT or similar) to the MASTER [L]/[R] jacks.
The connection principle for an external master recorder is shown below.
Monitor system
Master recorder
LINE OUT
LINE IN
MRS-4
MASTER[L]/[R]
Preparations for mixdown
4-1
MixdownStep 4
ZOOM MRS-4
18
To listen to the final mix on the monitor system during mixdown, set the master recorder
to monitor the input source. (For details, refer to the documentation of the master
recorder.)
2.
Make sure that all status keys are lit in green.
3.
Set the [ON/OFF] keys 1/2 and the [METRONOME] key to OFF.
It is also possible to add the input signal from inputs 1/2 to the mix. In this case, set the
desired [ON/OFF] key to ON (
P. 38).
1.
Set the [MASTER] fader to 0 dB.
2.
While the main screen is shown, press the [TRACK PARAMETER] key.
The track parameter menu appears. With this menu, you can change the settings for
individual tracks.
3.
Use the status keys 1 – 4 to select the track.
While the track parameter menu is shown, the status keys 1 – 4 serve for selecting a track.
The status key for the currently selected track is lit in orange.
Selectable track parameters and settings are listed in the table below.
HIEQ ON
FADE100
SettingTrack parameter
Adjusting volume/pan/EQ
4-2
HIEQ
Switches high EQ on or off
HIG
Adjusts high EQ boost/cut from -12 (dB) to +12
(dB). This parameter is only shown when HI EQ is
set to ON.
Display
Parameter
Setting range Description
HIF
Selects the frequency for high EQ boost/cut. This
parameter is only shown when HI EQ is set to ON.
Track parameters and settings
ON/OFF
-12 – 12
500 – 8000Hz
HI EQ
ON/OFF
HI EQ
GAIN
HI EQ
FREQUENCY
Basic Operation
Basic Operation
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-4 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-4

Zoom MRS-4 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info