edit menu (TRIM), pressing the MASTER key causes an
"M" to appear at the track number position. This indicates
that the master track has been selected for the operation.
TRIM is a function that was added in version 1.2. It serves
for trimming unwanted portions at the beginning and end of
a track. For details, see page 12.
Mixdown using master track
This section explains how to mix tracks 1 – 10 of the
recorder section and the rhythm section (drum kit + bass
program) onto the stereo master track (bounce).
First, you must select the V-take of the master track that
yor plan to record onto.
1.
In the main screen, press the [PROJECT/UTILITY]
key.
The display will indicate "PROJECT".
2.
Use the cursor [
E
]/[
R
] keys to make the display
indicate "UTILITY BOUNCE", and then press the
[ENTER] key.
3.
Use the cursor [
E
]/[
R
] keys to make the display
indicate "BOUNCE REC TAKE", and then press the
[ENTER] key.
4.
Verify that "CURRENT" is shown on the second line
of the display.
This screen selects the V-take to be bounced to. When
"CURRENT" is shown, the currently selected V-take will
be used for recording. If another setting is shown, the
bounced material may be recorded on an unexpected track.
Turn the dial to switch to the "CURRENT" indication.
5.
To return to the main screen, press the [EXIT] key
several times.
The UTILITY BOUNCE menu also comprises a REC TR
screen for selecting whether recorded tracks are played
when executing a bounce, but this setting has no effect
when playing a bounce on the master track.
6.
Press the display section [V-TAKE] key.
The [V-TAKE] key will light, and a screen will appear in
which you can switch the V-take for each track.
7.
Press the MASTER status key.
The master track is selected as the target track. The display
shows the number and the name of the V-take currently
selected for the master track. (For unrecorded V-takes, the
name field reads "NO DATA".)
You can also select the master track by moving the cursor
to the track number and turning the dial fully to the right.
8.
To switch to a different V-take, use the cursor
[
E
]/[
R
] keys to cause the V-take number to blink,
and turn the dial to select 1 – 10.
9.
When V-take selection is completed, press the
[EXIT] key.
The light of the [V-TAKE] key goes out, and the main
screen returns.
