Manual Zoom 9010 (page 31 of 63) (English)

666219

Zoom out

Zoom in

1/63

10-EQUALIZER

program with 2-in/2-out dual channel operation.

Parameters are the same as EQUALIZER

above.

11-THRU

This is a bypass setting. It sends the input signal

unprocessed to the next stage. The volume of the

signal can be adjusted.

L-Output, R-Output: 0

200%

Determines the total output level of the processed

signal for each channel.

TYPE

PROGRAMS

Note:

Both Type

programs, Reverb D and Multi

Chorus use Inputs

and 2, and Outputs 1 and

REVERB

This reverb program takes full advantage of the

9010's sophisticated signal processing capabilities.

Reverb time

can

be set independently for the low-

and high-frequency bands, making possible a wide

range of reverb effects.

Rev

Hi (High Frequency Reverb

Tap):

0.3

30.0 sec.

Determines the time it takes for the high frequency

components in the reverberation sound to die out.

lncreasing this value creates a brighter reverb

sound.

Rev

Lo (Low Frequency Reverb Tap):

0.3

30.0

sec.

Determines the time it takes for the low frequency

components in the reverberation sound to die out.

lncreasing this value creates a warmer reverb

sound.

Pre Dly (Pre-delay Time):

0.1

700 ms

Determines the time that elapses between the

direct sound and the first of the reflections that

make up the reverb sound.

E/Ref Lvl (Early Reflection Level):

100%

Determines the level of the first discrete sound

reflections' before the dense reflections of the

reverb sound begin. Higher values' give the

sound greater brilliance and impact, and increase

the size and acoustic liveness of the apparent

room.

E/Ref Dly (Early Reflection Delay):

0.1

700 ms

Determines the time that elapses before the onset

of the early reflections. lncreasing this value

increases the apparent room size.

E/Ref Lo (Low Frequency Early Reflections):

0-4

Determines the amount of low frequency early

reflections in the early reflection sound. Increas-

ing this value creates a warmer sound.

Hi Damp:

0-10

Determines the degree of high frequencies in the

reverb sound. Higher values make the high fre-

quencies decay faster, producing a softer sound.

Lo Damp:

Determines the degree of low frequencies in the

reverb sound. Higher values make the low fre-

quencies decay faster, producing a brighter, more

acoustically "live" sound.

Hi Cut:

Determines the brightness of the overall sound.

lncreasing this value decreases the brightness.

Density: 0

Determines the density of the reverberations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9010 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zoom 9010 Manual

Product: