666219
30
Zoom out
Zoom in
Previous page
1/63
Next page
R-XTap (Right Cross-tap):
off, 1
--
200%
Determines amount the right signal is initially
delayed before being sent to the left delay circuit.
(The delay sound is not output when this parame-
ter is set to OFF.)
Input: 0
-
100%
Determines the level of the input signal.
6-CHORUS
C
This stereo chorus program features excellent separ-
ation and definition. Parameters are the same as
CHORUS
B
above.
7-FLANGER
C
This comprehensive 2-in/2-out stereo flanger pro-
gram allows the two modulation signals to be set in
sync with each other. Parameters are the same as
FLANGER
B
above.
8-PHASER
C
Parameters are the same as PHASER
B
above.
9-PITCH SHIFTER
C
This complex program combines a stereo pitch
shifter with delay and feedback circuits,
making
possible special effects like ascending and descend-
ing delay- generated arpeggios.
L (Left) Delay:
1
--
600 ms
Determines the delay time for the pitch-shifted
signal of the left channel.
L
(Left) Feedback: 0
--
90%
Determines how much of the left channel's pitch-
shifted and delayed signal is fed back to the
effect. lncreasing this value produces more
delayed repeats, each being pitch-shifted up or
down from the previous repeat according to the
Pitch and Fine parameter settings.
R(Right) Feedback: 0-90%
Determines how much of the right channel's
pitch-shifted and delayed signal is fed back to the
effect. lncreasing this value produces more
delayed repeats, each being pitch-shifted up or
down from the previous repeat according to the
Pitch and Fine parameter settings.
HiDamp: 0-10
Determines the degree of high frequencies in the
delayed repeats or feedback sound of both chan-
nels.
Higher values make the high frequencies
decay faster, producing a softer delayed sound.
XTaps (Cross-taps):
off, 1
--
200%
Used in conjunction with the Left and Right Delay
parameters above, this determines the time each
signal is delayed before being crossed over to the
opposite output. The value is expressed as a
ratio to the Delay value.
(This delay sound is not
output when set to OFF.)
Input: 0
-
100°/~
Determines the level of the input signal.
R (Right) Delay:
1
--
600
ms
Determines the delay time for the pitch-shifted
signal of the right channel.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9010 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info