666219
7
Zoom out
Zoom in
Previous page
1/63
Next page
(11) EXECUTE Key
For both starting and confirming execution of an
operation.
(12)
Card
Slot
For insertion
of
optional
RAM
cards and
ROM
cards.
(13)
Card lndicator LED
Lights when card operation is selected.
(14) User Indicator
LED
Lights when internal user Patches are selected.
When internal preset Patches are selected, both card
and user indicator
LEDs are unlit.
(15) Group Display
LED
Indicates the currently selected Routing.
(16) Patch Display
LED
lndicates the currently selected Patch number.
REAR
PANEL
(17) LCD
Displays various information, such as the name of the
selected Patch, parameter values and messages.
(18)
EDlT
DlAL
For selecting menus and changing parameters. The
EDlT
DlAL has two different operating modes, depen-
ding on how it is rotated:
1)
Normal Operation-The conventional way of ro-
tating the dial slowly, so that items are scrolled
through or selected one by one.
2)
Rapid Operation-Automatically switched to
when the dial is spun around quickly. This mode
allows you to
jump
between effect or parameter
groups, rather than scrolling through them one
by one.
(19)
POWER
Switch
(20)
INPUT Terminals
1
--
4
For input of the signal to be processed. Only the
channel
1
input is mixed with the
Hi-Z
input on the
front panel.
Note:
The
9010
input terminals can be used with
either balanced or unbalanced signals. The type of
input is determined by the type of plug used; input
from mono plugs is automatically unbalanced, while
properly wired stereo plugs make the input balanced.
The plug arrangement is shown in the illustration
below:
Stereo
phone
jack
(21) INPUT 1/2,
3/4
Input Level Switches
For selecting the input levels of the input pairs.
When the switch is pressed down, input level is
+4
dBm. When the switch
is
in its upright position, the
input level is
-20
dBm. Select the level according
to the type of equipment or musical instrument con-
nected.
Hot
Cold
Ground
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9010 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info