666219
6
Zoom out
Zoom in
Previous page
1/63
Next page
FRONT PANEL
I
@!
(1)
INPUT/FUNCTION Keys 1
--
4, lndicator LEDs
These keys have two different functions, depending
on the menu or operation selected:
1)
In Alternate Functions-for selection of func-
tions on the menu.
2)
In menus other than Alternate Functions- for
checking the input and output level, and setting the
input attenuator.
The LEDs of the keys light up in green when an input
signal of nominal level is detected.
A
continuously
red LED indicates a signal overload that could result
in distortion.
(2)
ALT Key, lndicator LED
For displaying the Alternate Functions menu on the
LCD. lndicator
LED
lights up in red when the key is
pressed.
(3)
QUICK Key, lndicator LED
For selecting the Quick Edit mode. lndicator LED
lights up in red when the key is pressed.
(4)
MODE
Key
For selecting the following operation modes, in the
order given:
PATCH SELECT Mode
EDlT Mode
NAMING
Mode
MIDI Mode
SYSTEM Mode
GROUP CHANGE Mode
Note:
The Patch Select mode is the default mode of
the
9010;
pressing the EXIT key in any mode returns
operation to the Patch Select mode.
(5)
DlAL Key, lndicator LED
Pressing this key alternates between two states:
When LED is green
-
EDlT DlAL is used to select
menus.
When
LED
is red-EDIT DlAL is used to set parame-
ters.
(6)
Hi-Z (High Impedance) lnput Jack
For direct front panel input of instruments such as
electric guitars, keyboards, etc. This input signal is
mixed with the rear panel channel
1
input signal.
(7)
Hi-Z Input Level Control
For adjusting the Hi-Z input level.
(8)
STORE
Key, lndicator LED
For selecting the Store menu, lndicator LED lights
up in red when the key is pressed.
(9)
BYPASS
Key, lndicator
LED
For bypassing the effect circuitry so that only the
original, unprocessed (dry) signal is output. In-
dicator LED lights up in red when the bypass function
is active. The BYPASS key is effective in all modes.
(10) EXIT Key
This key has two functions, depending on the mode
or operation selected:
1)
Exiting from the currently selected mode and re-
turning to the Patch Select mode.
2)
Aborting
the
current operation.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9010 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info