666309

Zoom 2100 Manual

6
Zoom out
Zoom in
Previous page
1/24
Next page
4
Listening to a patch
When you turn on the power to the 2100, it automatically enters Play mode. This section describes
the panel display in Play mode and how to select a patch.
Panel display in Play mode
The display and LEDs on the panel indicate the following
information in Play mode:
● BANK number: The number of the currently-selected
bank (0–9) appears.
● PATCH number: The number of the currently-
selected patch (1–3) appears.
● BOTH indicator: This indicator indicates the
currently-available group. When a dot (.) lights up,
you can use both the USER group and the PRESET
group. When the dot is turned off, you can use either
one of these groups.
● PRESET indicator: This indicator indicates the
currently-selected group. When a dot (.) lights up, it
indicates that the PRESET group has been selected.
When the dot is turned off, the USER group has been
selected.
● Effect module on/off:
If a particular effect module is turned on for the
currently-selected patch, the corresponding module
LED on the panel lights up.
PATCHBANK
PRESETBOTH
PRESET indicator
BANK number PATCH number
BOTH indicator
Gain TrimMaster Level
JAM 1 JAM 2
JAM PLAY
MONITOR
21
Module LED
Selecting a patch
Type(RTM)
Sens
/
Rate
POSITION
POSITION
1.COMP/WAH•DIST
2.DIST•COMP/WAH
COMP
/
WAH
Type
Gain
/
Top
Tone
/
Body
LevelPatch Level
DIST
Treble
Middle
Bass
ZNR
EQ
Type
Depth
/Time
Rate
/Pit/FB
Mix
/Mode
MOD
Type
Time
Tone
/FB
Mix
REV
/
DLY
1.AUX Mix
3.AUX Rch
2.AUX Lch
1.COMP
2.PEDAL-WAH
3.AUTO-WAH
4.TREMOLO
5.RING MOD
6.SLOW ATTACK
4.PLAYNOTE
Max Rec Time
Constant Pitch
Tone
Gain TrimMaster Level
JAM 1 JAM 2 JAM 3 JAM REC
Presence Amp Sim Rev Trim FUNCTION
SAMPLER
COMP
/
WAH
UTILITY
PARM
1.CLEAN
2.OVER DRIVE
3.
DISTORTION
4.FUZZ
/
GRUNGE
5.LEAD
6.METAL
7.ACOUSTIC
DIST
1.CHORUS
2.STEREO CHO
3.
FLANGER
4.PHASE
5.PITCH
6.PEDAL-PITCH
7.DELAY
MOD
1.HALL
2.ROOM
3.PP-DELAY 1
4.PP-DELAY 2
REV/
DLY
JAM PLAY
MONITOR
ON
/
OFF
VALUE
+
–
B
321
GROUP(EXIT)
PATCHBANK
STORE
PRESETBOTH
BANK
SAMPLER
FUNCTION
SPEED
REC
Use the [GROUP/EXIT] key to select the
desired group.
Pressing the [GROUP/EXIT] key repeatedly will
change the group in the following sequence:
When you switch the groups from USER to PRESET or
from PRESET to USER, the bank number will flash.
Use the [BANK▲] switch to select the
desired bank.
Pressing the [BANK▲] switch once increments
the bank number by one and selects the bank.
The bank number flashes.
• Pressing the [BANK▲] switch does not change the
patch. The patch will be changed in the next step.
• You can use the [FUNCTION] switch to decrement the
bank number. (See page 8.)
Use the foot switches 1–3 to select the
desired patch.
The bank number stops flashing, and the new
patch is selected.
While the USER group is selected:
While the PRESET group is selected:
Available
group:
BOTHUSER PRESET USER
Available
group:
USERPRESET BOTH PRESET
HINTHINT
HINTHINT
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 2100 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info