D. Power off
a. Press the "ON/OFF" switch on the side of the robot to "OFF".
Product Operation
3. Scheduling
You can schedule the robot to make it start cleaning automatically at a certain time every day.
Scheduling by keys on the main body
Note: The robot can only be set when it’s in Standby or Charging mode. If the robot is in sleep
mode, press on main body or ON/OFF button on remote control to wake up the robot. If the
robot is in Cleaning mode, stop it before scheduling.
Schedule by the LED panel on robot
A. Setting Robot Clock
a. In standby or charging status, press to start the clock-setting. The LED panel will
show the current system time.
b. Press to enter the hour-setting mode, the left two numbers on LED panel will flash.
Press to increase hour or “WALL” to decrease it.
c. Press again to enter the minute-setting mode, the right two numbers on LED panel
will flash. Press to increase it or “WALL” to decrease it.
d. Press again to confirm the setting.
B. Setting the scheduling time
a. In standby or charging status, press for two times to start scheduling, LED panel
will show previous scheduled time or “00:00” if there is no schedule settled before.
b. Press to enter hour-setting mode, the left two numbers on LED panel will flash. Press
to increase hour or “WALL” to decrease it.
c. Press again to enter the minute-setting mode and the right two numbers on LED
panel will flash. Press to increase minute or “WALL” to decrease it.
d. Press again to confirm the scheduling.
C. Cancel the scheduling
a. Set the scheduling interval to 00:00.
b. Turn off the power switch on the right side of robot, and turn it on again after 3 seconds.