739040
38
Zoom out
Zoom in
Previous page
1/110
Next page
8
b. Press on robot or HOME on remote control to operate the robot to go charging
station for recharging as shown in Fig.b.
Note:
a. When robot is charging, LED panel will gradually show 11:11, from left to right.
b. Once charging is completed, LED panel will show 11:11.
c. In the standby status, the robot will broadcast voice please charge when battery power is low.
d. In the working status, the robot will return to charging station automatically when battery power
is low.
To ensure optimum battery performance:
a. Before first use, charge the robot for 12 hours.
b. Charge the robot as soon as battery power is low.
c. The robot will return to charging station automatically when it has finished cleaning or if battery
power is low.
d. If the robot is not to be used for a long time, fully charge the battery, turn the power switch off,
remove and store it in a cool, dry place.
e. If the robot is not to be used for more than 3 months, charge the robot for 12 hours, turn the
power switch off, remove and store it in a cool, dry place.
Product Operation
2. Starting up/ Standby/ Sleeping/ Power off
A. Starting up
a. Press the ON/OFF switch on the side of the robot to ON.
b. Press on main body or ON/OFF on remote control to start cleaning.
Note: If robot is in sleeping mode, press on main body or ON/OFF on remote control to
wake up the robot from sleeping mode, then press again, the robot will start cleaning
automatically.
B. Standby
Standby means the robots main power is ON, and the robot is ready to use. It can be changed
to standby mode by below methods:
a. During robot cleaning, press on main body to enter standby mode.
b. During robot cleaning, press ON/OFF button on remote control to power off the robot.
C. Sleeping
In sleeping mode, the robot can only be waken up from button on main body or ON/OFF
on remote control in order to save power. To turn robot into sleeping mode from standby mode:
a. Keep pressing on main body for 3 seconds.
b. Robot will automatically enter sleeping mode if there is no command received for more than
60 seconds.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoef Robot SR806W Sjaan at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoef Robot SR806W Sjaan in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info