713909

Zippie Youngster 3 Manual

15
Zoom out
Zoom in
Previous page
1/112
Next page
ENGLISH
15
YOUNGSTER 3
Headrest
Headrest (Fig. 4.10)
The headrest can be raised and moved horizontally both
forwards and backwards.
To do this, loosen the screw (1, 2 or 3).
Now you can adjust to the desired position. Tighten screws
again (see the page on torque).
In order to fold the wheelchair, please open the clamping lever
(1), slide the headrest bracket to the right side and fold it down.
Now you can fold the chair. To unfold the chair, please fold the
headrest bracket up, re-position the sliding gap into the
clamping lever and slide it to the left. Finally close the clamping
lever again (Fig. 4.11).
(Fig. 4.10)
3
1
2
(Fig. 4.11)
1
1
Adjusting the castor
To ensure that both forks are set parallel, simply count the teeth
visible on both sides. After setting the castor fork, the teeth will
guarantee a secure position, allowing an adjustment of 16° in 2°
increments (Fig. 4.12).
Use the flat side on the front of the castor fork to check
for a right-angled position to the ground.
The patented design allows the castor fork to be turned, so that
it can be reset at right-angles to the ground when the seat angle
is changed.
Setting the Castor, Castor adapter & Castor fork (Fig.
4.13)
If the wheelchair veers slightly to the right or left, or the castors
flutter, it may be caused by one or more of the following:
• Forward and/or reverse wheel motion has not been set
properly.
• The castor angle has not been adjusted properly.
• Castor and/or rear wheel air pressure is incorrect; the wheels
do not turn smoothly.
The optimum adjustment of the castors is required so that the
wheelchair runs in a straight line.
Castors should always be adjusted by an authorized dealer.
The castor plates must be re-adjusted, and the wheel receiver
must be checked every time the rear wheel position has been
altered.
Castors
+8SDgr
- 8SDgr
Fig. 4.12
Fig. 4.13
2
3
1
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zippie Youngster 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zippie Youngster 3 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info