Manual Zippie Youngster 3 (page 14 of 112) (English, German, Dutch, French, Italian)

713909

Zoom out

Zoom in

1/112

ENGLISH

YOUNGSTER 3

Angle-adjustable footplate (composite + aluminum) -

(Fig. 4.8 - 4.9)

The footplates can be flipped up to facilitate getting in

and out of your wheelchair.

The footplates can be adjusted within their angle of inclination,

relative to a level surface. Loosen screws (1 to 2). Then set the

footplates to the desired angle. Afterwards, tighten all screws.

After adjustment, always make sure that all screws are

tightened properly (see the page on Torque). In order to avoid

the wheelchair tipping over, make sure that the minimum

interval of 2.5 cm between the foot rest tubing and the ground is

maintained (with horizontal seat).

To adjust the width open the screws (1+2) then slide out

both brackets (3+4).

Foot Plates

Fig. 4.8

Fig. 4.9

3 4

Lightweight footrest (Fig. 4.7)

The footboard angle can be adjusted by loosening the screws (2).

Side protection panels can be fitted to the footboard using the

mounting holes (3). These prevent the feet slipping off accidentally,

(Fig. 4.8). Make sure that after any adjustment work, all screws are

tightened correctly (see the page on torque).

Width adjustment

To adjust the width of the footboard open the screw (2). Then

you can slide in and out the tubes in the holder to adjust the

width of the footboard (Fig. 4.7).

Please make sure that the screws are tightened with the

correct torque .

Fig. 4.7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zippie Youngster 3 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zippie Youngster 3 Manual

Product: