564048
9
Zoom out
Zoom in
Previous page
1/14
Next page
(
SRE240E)
T
he heater has been in operation
(SRE246E)
continuously for a period of 69/50 hours hours
and has turned itself off automatically. Switch the heater back on.
-- : --
+
Out of fuel. Refill removable tank.
-- : --
+
Too little ventilation. Ventilate better.
e - 1 1
+
Too little ventilation. Ventilate better.
Always contact your Zibro dealer for any malfunctioning not listed above.
AUTOMATIC DEACTIVATION
This heater is fitted with a safety system that ensures that it switches off
automatically after 69 hours (SRE240E) / 50 hours (SRE246E) continuous operation.
The following will then appear in the display: / . If desired, you can
switch the heater on again by pressing the button
Ƹ (see Section D).
AUTOMATIC CLEANING MODE
When the heater has been burning continuously for two hours at its highest
setting, the burner will automatically start an autoclean procedure. The display
will show the autocleaning code
cl:05 running back to cl:01. The procedure takes 5
minutes, during which the heater will burn at its lowest setting, while the burner
autocleans. When the burner is clean again, the heater will automatically switch
back to the highest setting again.
THE USE OF THE MOTION DETECTION SENSOR
This heater is equipped with a motion detection sensor. The sensor is placed at the
front side of the heater and it signals every single movement. The motion
detection sensor has a horizontal detection angle of 80
o
and a vertical detection
angle of 20
o
. The sensor detects movements as far as 7 m.
If the sensor does not detect movements for 10 minutes then the heater will
automatically switch to a lower combustion level. As a result less fuel will be used.
Switch on the motion detection sensor;
Switching on the motion detection sensor can only be done when the heater is
turned on. Push the “Motion” button . A signal will sound and the “Motion”
light will light up (gr
een).
If the sensor does not detect movements for 10 minutes then the heater will
automatically switch to a lower combustion level. The motion detection sensor
light keeps lighted up. If the sensor detects movement the motion light will blink.
The heater switches back to the latest temperatur
e setting.
Switch off the motion detection sensor;
The Motion detection sensor can be switched off by pressing the “Motion” button
again. A sound signal will be heard and the “Motion” light will go out.
I CHILDPROOF LOCK
The childpr
oof lock can be used to prevent children accidentally changing the
heater settings. When the heater is burning and the childproof lock is on, the heater
can only be switched of
f. Other functions ar
e blocked then. If the heater has alr
eady
been switched of
f, the childproof lock also prevents accidental ignition of the
heater.
Activate the childproof lock by pressing the appropriate key ƹ and holding it
down for mor
e than 3 seconds. The KEY
-LOCK indicator
(
)
will appear on the
information display (Fig. I), indicating that the childproof lock has been activated.
Switch off the childproof lock by pressing the key
ƹ and holding it down for more
than 3 seconds once again.
4
56
I: When the mark
appears, the childproof
lock has been activated.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro SRE 246E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro SRE 246E in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zibro SRE 246E

Zibro SRE 246E User Manual - German - 14 pages

Zibro SRE 246E User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info