Manual Zibro R 263 T (page 68 of 125) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

564211

Zoom out

Zoom in

1/125

Before igniting the heater, always check the fuel indicator ² to see whether the

removable tank needs filling up.

Always ignite the heater with the ignition coil ¸. Never use matches or a

cigarette lighter.

Follow the procedure below:

Turn the knurled wick adjustment knob ᕢclockisetoitsstop(Fig.K).Ifyou

apply more pressure you may turn it slightly further; however, it will automati-

cally return to the startposition.

Push in the ignition button » (Fig. L), but do not apply too much force.

Release the ignition button as soon as a flame is visible in the combustion

chamber ¿.

If the heater has been used only a few times and the wick adjustment knob is not

locked, first turn the wick adjustment knob (Fig. M) completely left, before put-

ting the wick in the highest position for ignition (Section C).

After having ignited the heater, always check whether the combustion

chamber ¿ is level, by sliding it slightly to the left and the right by its hand-

le ´ (Fig. F). This should be a smooth movement. If the combustion chamber

is not level, this will cause smoke and soot to develop.

D BURNING OF THE HEATER

After you have ignited the heater, it will take 10 to 15 minutes before you can check

whether the heater is burning well. Too high a flame may cause smoke and soot,

whereas too low a flame causes smells. The page opposite the folding page shows

the minimum and maximum permissible burning heights of the flame (Fig. Q). The

flame can be slightly adjusted with the knurled wick adjustment knob · (Fig. M).

Burning that is too low may be caused by:

̈ insufficient fuel (fill the tank)

̈ poor fuel quality (contact your dealer)

̈ insufficient ventilation (put window or door ajar)

̈ wastage of the wick (contact your dealer or replace the wick,

refer to section L

E SWITCHING OFF THE HEATER

Push the OFF-button ³. The flame will extinguish after a little while (Fig. N).

F MALFUNCTION, CAUSES AND SOLUTIONS

If any malfunctioning cannot be solved from the directions below, please contact

your dealer.

THE HEATER DOES NOT IGNITE

̈ The batteries are not positioned correctly in the holder.

Check (Fig. G).

̈ There is not enough power left in the batteries for the ignition.

Replace (Fig. G).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zibro R 263 T in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 17,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zibro R 263 T Manual

Product: