Manual Zibro Moonlighter (page 62 of 101) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

460414

Zoom out

Zoom in

1/101

NOTE: The space between the wick adjuster and the

primary air tube should be even all around.

NOTE: Make certain the top of the wick adjuster and

the top of primary air tube are the same weight. If they

uneven, the flames tend to be uneven, too.

Tighten the three (3) wing nuts around the wick

adjuster.

Turn the wick adjuster knob to be sure the wick moves

smoothly up and down.

AFTER REPLACING THE WICK, CHECK THE OPERATION

OF THE AUTOMATIC EXTINGUISHER.

Wick height should be 6 mm (1 /4 in.) when wick

adjuster knob is turned fully clockwise. Be sure to

check.

NOTE: If wick does not move smoothly and easily, or

wick height is not in de range of 5-6 mm (1/5 – _ in.), do

not use the heater. Disassemble and repeat items 6

through 11.

NOTE: If any ragged edges appear on the top of the

wick, trim them with a scissors carefully. DO NOT cut

the body of the wick.

Replace the inner heat chamber on the top of the

primary air tube.

Replace the heater cover on the fuel tank and secure it

into position with three (3) thumbscrews. Replace

batteries in the battery holder. Be sure that the outer

heat chamber is properly seated by moving the wire

heat chamber handle left and right.

Once again, check the proper operation of the

automatic extinguisher.

NOTE: Before lighting a new wick for the first time,

turn the wick to its lowest position and allow the wick

to saturate with ker

osene for about thir

ty (30) minutes.

1111aa

1111bb

1122 1133aa

1133bb

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zibro Moonlighter in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zibro Moonlighter Manual

Product: