460414
61
Zoom out
Zoom in
Previous page
1/101
Next page
REPLACING THE WICK
L ENSURE THAT THE HEATER IS OFF AND COMPLETELY
COOLED BEFORE STARTING TO REPLACE THE WICK.
Release the automatic extinguisher by pushing down on
the manual shutoff.
Remove the three (3) thumbscrews holding heater
cover, and lift cover up. Remove batteries from the
battery holder.
Lift the inner heater camber off the hole in the primary
air tube.
Remove the three (3) wing nuts around the wick
adjuster. Lift the wick adjuster off the heater while
moving it slightly back and forth.
Slide two fingers between the orange band on the wick
and the wick adjuster. After lifting all three (3) pins off
the slots, fold the wick and remove it.
Place the wick adjuster on its slide. Next, line up the two
(2) openings in the wick adjuster: 1) the diagonal slots
in the fixed part of the wick adjuster, and 2) the slots in
the moving parts of the wick adjuster controlled by the
wick adjuster knob.
Fold the new wick in quarters and insert it into the wick
adjuster from wick adjuster bottom. Place one of the
pins in one of the line-up openings. If you experience
difficulty, gently turn the wick adjuster knob clockwise.
Then insert the two other pins, turning the wick
adjuster knob if necessary.
Finally, gently press the wick, all along its
circumference, against the adjuster to insure that it is
firmly in place.
Lower the wick adjuster into the fuel tank, guiding the
tail of the wick so it fits over the primary air tube and
evenly into place.
Point the wick adjuster knob to the front of the heater.
Insure that the wick adjuster is centered over the studs
on the fuel tank.
9
8
7
6
5
4
3
2
1
4
60
22aa
22bb
44
55
77
11
33
99aa
99bb
88
1100
66
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro Moonlighter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro Moonlighter in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info