Manual Zibro LC 300 (page 11 of 135) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

728820

Zoom out

Zoom in

1/135

I CHILDPROOF LOCK / PARENTAL CONTROL

The childproof lock can be used to prevent children accidentally changing the

heater settings. When the heater is burning and the childproof lock is on, the

heater can only be switched off. Other functions are blocked then. If the heater has

already been switched off, the childproof lock also prevents accidental ignition

of the heater.

Activate the childproof lock by pressing the appropriate key M and

holding it down for more than 3 seconds. The KEY-LOCK indicator

will appear

on the information display (Fig. I), indicating that the childproof lock has been

activated. Switch off the childproof lock by pressing the key M and holding it down

for more than 3 seconds once again.

J THE CORRECT USE OF ‘SAVE’

The ‘SAVE’ function allows you to limit the temperature. When this function is

activated, the heater will automatically switch off, when the room temperature

exceeds the set temperature by 3°C. Subsequently, when the room temperature has

dropped again to the set temperature, the heater will automatically switch on again.

Activate the ‘SAVE’ setting by pressing the appropriate  key. The SAVE indicator

light will light up (Fig. J). Switch off the function by pressing the SAVE key once

again.

Without the ‘SAVE’ setting your heater will maintain the set temperature by

approximation as well, by adjusting its heating capacity. ‘SAVE’ is an economy

setting, which you can use when, for instance, you are not present in the room or

to keep it frost-free.

K THE ‘FUEL’ INDICATOR

When the FUEL indicator appears, it means that there is only fuel left for 10

more minutes. The count-down of the remaining heating time can be seen in the

information display K (Fig. K).

You remove the fuel tank and refill it outside the living room (Section B).

In the display the number 10 will appear, you will hear an alarm signal every

two minutes, warning you to refill the removable tank. If you do not react, the

heater will extinguish by itself. The heater will also sound a warning signal,

when it switches off. The fuel indicator will blink, while four lines (--:--) are

blinking in the information display. You can stop this by pressing the button

L once more.

Once the heater has used up all its fuel and extinguished, it will take some time,

after the refill, before the heater is completely ready for use again.

L THE ‘VENT’ INDICATOR

When there is insufficient ventilation in the room, the heater shuts off

automatically. When this occurs, e -1 1 is displayed and the VENT indicator is

blinking (fig. L). After improving the ventilation of the room (e.g. by opening a

door or window a little more), the heater can be ignited by pushing the button

L again.

Fuel filter

K: When the FUEL

indicator has appeard,

the information display

will show the number of

minutes of fuel left in

the tank.

L: A blinking VENT

indicator is a sign

that you need extra

ventilation.

J: When the SAVE light

lights up, the heater will

automatically switch on

or off in order to remain

within a specified tem-

perature range.

I: When the mark

appears, the childproof

lock has been activated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zibro LC 300 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 17,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zibro LC 300 Manual

Product: