Manual Zibro Kamin SRE 188E (page 49 of 85) (English, German, Dutch, Danish, French, Italian, Spanish)

460436

Zoom out

Zoom in

1/85

he available temperature settings range from 6°C minimum to 28°C maximum.

When the heater has been unplugged for more than 10 minutes (or after a power

failure), the temperature will reset to the factory setting of 20°C.

F USING THE TIMER

he timer allows you to switch on the heater automatically at a preset time.

In order to switch on the timer, the correct time must have been set

(refer to

Section C)

and the heater should be off.

Follow the procedure below:

Press the

button Ƹ

and then the TIMER key ƻ immediately after that.

The TIMER light and the information display

¹ will start blinking.

Use the adjustment keys

ƺ to set the time at which the heater must ignite.

Use the key on the left (

Ĭhour) to set the hours and the key on the right

(

įmin.) to set the minutes (interval of 5 minutes).

After approximately 10 seconds the information display will show CLOCK

again and the TIMER indicator light will light up, indicating that the timer

function has been activated (Fig. H).

The timer will ensure that the room will have been heated to approximately

the required temperature at the set time.

When you want to switch off the heater and ignite it again with the timer, all

you have to do is press the TIMER key

(refer to Section G).

Press the

button Ƹ

once to clear the timer setting.

G SWITCHING OFF THE HEATER

There are two ways to switch off the heater.

Press the

button Ƹ

. The information display will show the CLOCK

signal. Within approximately one minute the flame will have extinguished.

Press the TIMER key

ƻ, when you want to switch off the heater and ignite it

again with the timer the next time. This not only switches off the heater, but

it also activates the timer function. Y

ou can change the required time with the

adjustment keys ƺ (refer to Section F).

H THE INFORMATION DISPLAY

The infor

mation display

¹ not only ser

ves as an indicator of the (set) time and

temperature

(Sections C, E, and F), it also indicates any malfunctioning of the

heater. The code on the information display tells you what is the matter:

CODE

INFORMA

TION

WHA

T TO DO

e - 0 Temperature within the heater too high. Cool-down and re-ignite.

f - 0 Power interrupted. Re-ignite the heater.

e - 1 Faulty thermostat. Contact your dealer.

f - 1 Faulty burner thermistor. Contact your dealer.

e - 2 Star

ting pr

oblems.

Contact your dealer

H: The TIMER indicator

light indicates that the

timer function has been

switched on.

☞

2 0 : 1 5

set room

save hour min. extension

timer

fuel

vent.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zibro Kamin SRE 188E in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 2,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zibro Kamin SRE 188E Manual

Product: