564203
5
Zoom out
Zoom in
Previous page
1/62
Next page
GB
7
Heating timer-thermostat
Parameter
Description
Programmable
values
UT01
OFF; Day 1, ...,Day7
H. timer-thermostat ena-
bling and disabling. Day of
the week setting
UT02
From 00 to 23Current hour setting
UT03
From 00 to 60
Current minutes setting
UT04
Reserved
Technical parameters setting
UT05
From 00:00 to 23:50 with
10-minute steps
Pellet boiler stove first start-
up time adjustment
UT06
From 00:00 to 23:50 with
10-minute steps
Pellet boiler stove first shut-
down time adjustment
UT07
Between on/off for days
from 1 to 7
Week day selection, first
time activation
UT08
From 00:00 to 23:50 with
10-minute steps
Pellet boiler stove second
start-up time adjustment
UT09
From 00:00 to 23:50 with
10-minute steps
Pellet boiler stove second
shutdown time adjustment
UT10
Between on/off for days
from 1 to 7
Week day selection, second
time activation
UT11
From 00:00 to 23:50 with
10-minute step
Pellet boiler stove third
start-up time adjustment
UT12
From 00:00 to 23:50 with
10-minute step
Pellet boiler stove third shu-
tdown time adjustment
UT13
Between on/off for days
from 1 to 7
Week day selection, third
time activation
UT14
From 00:00 to 23:50 with
10-minute steps
Pellet boiler stove fourth
start-up time adjustment
UT15
From 00:00 to 23:50 with
10-minute steps
Pellet boiler stove fourth
shutdown time adjustment
UT16
Between on/off for days
from 1 to 7
Week day selelction, fourth
time activation
The meaning of the user parameters are explained in detail
below:
UT01
Heating timer-thermostat enabling and disabling and
current hour setting.
This parameter is used to set the current day of the week or
to deactivate the set programming.
Press buttons and to select the desired value as
shown in the following table:
Upper
Display
MEANING
Day 1
Day 2
Day 3
Day 4
Day 5
Day 6
Day 7
OFF
Example:
if today is Thursday, select “Day 4”; but select “OFF” to
start the pellet boiler stove manually (without programming)
so that the heating timer-thermostat is disabled.
Press button to go to the following parameter.
UT02
Current hour setting
This parameter is used to set the current hour, press
buttons and to select the current hour.
Press button to go to the following parameter.
UT03
Current minutes setting
Press buttons and to adjust current minutes.
Press buttons to go to the following parameter.
UT04
Technical parameters setting
Press button to go to the following parameter.
The heating timer-thermostat function is used to program
the pellet boiler stove to automatically turn on and off within
a period of one week.
To access programming, hold down button for around
three seconds, “UT01” will be shown on the upper display:
by pressing button several times and referring to the
table below, the stove can be programmed according to
your needs. Press button to exit the programming phase
at any time.
These are the heating timer-thermostat parameters:
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Heating timer-thermostat disabled
Monday
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro DONATA 194 IDRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro DONATA 194 IDRO in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info