781884
26
Zoom out
Zoom in
Previous page
1/36
Next page
26 GB
The dust produced when using this tool
may be harmful to health. Do not inhale
the dust. Use a dust absorption sys-
tem and wear a suitable dust protection
mask. Remove deposited dust thorough-
ly, e.g. with a vacuum cleaner.
Always keep the connection cable from
the working area of the device. Always
guide the cable backwards, away from
the device!
Do not machine any materials that pres-
ent a danger to health (e.g. asbestos).
When working in walls ceiling, or oor,
take care to avoid electric cables and gas
or waterpipes.
Please turn the device immediately off
when the tool used gets blocked! Do not
turn the device on again when the tool
is still blocked. This could cause bounce
back with a high reaction moment. Deter-
mine and remove the cause of the block-
ing of the tool used while respecting the
safety instructions.
The possible causes may be:
it is tilted in the workpiece to be ma-
chined
it has pierced through the material to
be machined
the power tool is overloaded
Do not reach into the machine while it
is running.
Chips and splinters must not be removed
while the machine is running.
WARNING! Danger of burns
The insertion tool may become hot during
use.
when changing tools
when setting the device down
Warning! This electric tool generates an
electromagnetic eld during operation. This
eld can impair active or passive medical
implants under certain conditions. In order
to prevent the risk of serious or deadly in-
juries, we recommend that persons with
medical implants consult with their physi-
cian and the manufacturer of the medical
implant prior to operating the electric tool
Technical data
Blow rate min-1: 2000
Dimensions
L x W x H mm: 674 x 155.3 x 264.3
Blowing force Joule: 50
Weight kg: 14
Motor V/Hz: 230-240 V~ / 50 Hz
Power consumption
P1 W: 1900
Protection class: II
Type of Protection: IPX0
Tool tting: SDS-HEX
System 30 mm
Technical modications subject to change!
Sound and vibration
Sound and vibration values were measured
in accordance with EN 60745.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zgonc YPL 1900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zgonc YPL 1900 in the language / languages: English, German as an attachment in your email.

The manual is 1.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info