Manual Zgonc YPL 1250 (page 12 of 32) (English, German, French, Italian)

781877

Zoom out

Zoom in

1/32

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

12 І 32

ing the electric tool or if you connect the appliance

to the mains when it is switched on, this can lead to

accidents.

• Remove keys and wrenches before switching

on the electric tool. A tool or key which comes into

contact with rotating parts of the appliance can lead

to injuries.

• Avoid abnormal working postures. Make sure

you stand squarely and keep your balance at all

times. In this way, you can control the electric tool

better in unexpected circumstances.

• Wear suitable work clothes. Do not wear loo-

se clothing or jewellery. Keep hair, clothes and

gloves away from moving parts. Loose clothing, je-

wellery or long hair can get trapped in moving parts.

• If vacuuming devices and draining devices can be

tted, make sure that these are correctly attached

and correctly used. The use of a dust extraction

system can reduce the danger posed by dust.

Usage and treatment of the electric tool

• Do not overload the appliance. Use the correct

tool for your work. You will be able to work bet-

ter and more safely within the given performance

boundaries.

• Do not use an electric tool with a defective

switch. An electric tool that cannot be switched on

or off is dangerous and must be repaired.

• Pull the plug out of the socket and/or remove

the battery before making any adjustments to

the appliance, changing accessories or put the

appliance down. This safety measure prevents st-

arting the electric tool unintentionally.

• Keep unused electric tools out of the reach of

children. Do not allow people who are not famili-

ar with the appliance or who have not read these

instructions to use the appliance. Electric tools

are dangerous if they are used by inexperienced

people.

• Clean your electric tool carefully. Check whether

moving parts are functioning properly and not

jamming, whether parts are broken or damaged

enough that the functioning of this electric tool

is affected. Have damaged parts repaired before

using the appliance. Many accidents are caused

by badly maintained electric tools.

• Keep your cutting tools sharp and clean. Careful-

ly maintained cutting tools with sharp cutting edges

will jam less and are easier to control.

• Make sure to use electric tools, accessories,

attachments, etc. in accordance with these ins-

tructions. Take the conditions in your work area

and the job in hand into account. Using electric

tools for any purpose other than the one for which

they are intended can lead to dangerous situations.

Service

• Have your electric tool repaired only by trained

personnel using only genuine spare parts. This

will ensure that your electric tool remains safe to

use.

The term “electric tool” used in the safety instructions

refers to electric tools operated from the mains power

supply (with a power cable) and to battery operated

electric tools (without a power cable).

Workplace safety

• Keep your work area clean and well illuminated.

Untidy or unlit work areas can result in accidents.

• Do not operate the electric tool in an environ-

ment where there is a risk of explosions and

where there are inammable liquids, gases or

dust. Electric tools produce sparks which could set

the dust or vapours alight.

• Keep the electric tool out of the reach of child-

ren and other persons. If there is a distraction, you

may lose control of the appliance.

Electrical safety

• The connector plug from this electric tool must

t into the socket. The plug should never be alte-

red in any way. Never use adapter plugs together

with earthed electric tools. Unaltered plugs and

correct sockets reduce the risk of an electric shock.

• Avoid bodily contact with earthed surfaces such

as pipes, heating, ovens and fridges. The risk of

electric shock is increased if your body is earthed.

• Keep the tool out of the rain and away from

moisture. The ingress of water into an electric tool

increases the risk of an electric shock.

• Do not use the cable to carry the electric tool, to

hang it up or to pull it out of the socket. Keep the

cable away from heat, oil, sharp edges and mo-

ving parts of the appliance. Damaged or entang-

led cables increase the risk of an electric shock.

• If you are working outdoors with an electric tool,

only use extension cables which are designed

specically for this purpose. Using specially de-

signed outdoor extension cables, the risk of electric

shock is reduced.

• If operation of the electric tool in a damp envi-

ronment can not be avoided, use a earthleakage

circuit-breaker. The earth-leakage circuit-breaker

reduces the risk of an electric shock.

Safety of persons

• Be careful, watch what you are doing and use an

electric tool sensibly. Do not use the tool if you

are tired or under the inuence of drugs, alcohol

or medication. A moment of inattention when using

the electric tool can result in serious injuries.

• Wear personal protection equipment and always

wear safety goggles. Wearing personal protection

(such as dust masks, non-slip safety shoes, safety

helmet or ear protection, depending upon the type

and use of the electric tool) reduces the risk of inju-

ry.

• Make sure that the appliance cannot start up

accidentally. Ensure that the electric tool is swit-

ched off before you connect it to the power sup-

ply and/or insert the battery, or pick up or carry

the tool. If your nger is on the switch whilst carry-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zgonc YPL 1250 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zgonc YPL 1250 Manual

Product: