657581
34
Zoom out
Zoom in
Previous page
1/145
Next page
6766
FR FR
5  FICHE TECHNIQUE
Dimensions Largeur : 396 mm - Profondeur : 201 mm - Hauteur : 91 mm
Poids Environ 3,4 kg
Matériau Plastique ABS (boîtier extérieur)
Pompe Pompe à vide intégrée (auto-huilée - aucun entretien n’est nécessaire)
Pression du vide cca -750 mbar
Moteur
230 V CA, 50 Hz
Coupure automatique en cas de surchauffe
MN.bre maxi de tours/min 2900
Transformateur
220 V CA, 50 Hz/24 V CA 0,8 A
/12 V CA 0,4 A
Coupure automatique en cas de surchauffe
Volume de la pompe 14 litres/min
Commandes Électroniques
Puissance et tension nominales de la machine 200 W, 220-240 V CA
Pays d'origine Slovénie
Modèle VS 6
5.1 ROULEAUX DE FILM UTILISÉS POUR L’EMBALLAGE SOUS VIDE
Rouleau : film à 4 couches (PA/PE) – longueur 3000 mm x largeur 280 mm ou 200 mm
Épaisseur du film :
100 μm (partie lisse sans rainure) /130 μm (partie structurée avec rainure du film)
Qualité du film :
imperméable, 4 couches, sans germe, avec goût et odeur neutres, réutilisable, adapté au four à micro-ondes
et au bain-marie.
Temps et température du traitement et du contact avec les aliments :
Pour un traitement à température limitée, jusqu’à +70 °C (2 heures maximum). En alternative, jusqu’à +100 °C (15 minutes maximum).
SEAL "TOUCHE DE SOUDURE" (pos. 3)*
Cycle complet pour souder
les sachets
VACUUM PACKING OF BAGS / Start /
Stop "TOUCHE Marche / Arrêt / MISE
SOUS VIDE DES SACHETS"
(pos. 4)*
Cycle automatique complet pour
mettre sous vide et souder les
sachets
Cycle pour mettre sous vide et
souder manuellement les sachets
VACUUM PACKING OF CONTAINER
"TOUCHE DE MISE SOUS VIDE DES
RÉCIPIENTS"
(pos. 5)*
Cycle complet pour mettre sous
vide les récipients
on "marche" off indicator "voyant off" (pos. 2)*
LUMIÈRE VERTE ALLUMÉE
La machine est allumée
LUMIÈRE ROUGE
ALLUMÉE
L'appareil est en
surchauffe
LUMIÈRE ROUGE
ALLUMÉE
Le récipient contient du
liquide
LUMIÈRE ROUGE
ALLUMÉE
Mise sous vide des
sachets et mise sous
vide des récipients
LUMIÈRE ROUGE
CLIGNOTANTE
Soudure et refroidissement
vacuum
"mettre sous vide"
(pos. 7)*
seal indicator
"voyant soudure"
liquid block
"blocage liquide"
(pos. 8)*
overheating
" surchauffe"
(pos. 6)*
* Les positions se réfèrent à la Figure 1 de la page 64.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zepter VacSy Sealing Unit VS-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zepter VacSy Sealing Unit VS-S in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 10,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info