657586

Zepter PWC-301 TuttoSteamy Manual

16
Zoom out
Zoom in
Previous page
1/20
Next page
EN
16
Type of fabric
Temperature
setting
Synthetic fabric (e.g. acrylic, viscose, polyamide and silk)
Wool
Light cotton
Linen/ cotton
SETTING THE TEMPERATURE
Set the required ironing temperature by turning regulator dial (3),
corresponding power LED is switched ON.
IRONING WITH THE STEAM IRON
CAUTION!
Follow the ironing instructions are for the laundry or clothes to be ironed.
Direct the rst steam jet onto a separate cloth. While ironing, only press the
steam button at a suitable distance. Let the iron slide lightly over the laundry.
No excessive pressure is required. Always iron on an ironing surface that is
permeable to steam and heat-resistant. Select the ironing temperature
according to the type of material. Follow the instructions on the garment
labels. Always iron completely dry laundry to prevent further creases from
forming. Iron delicate clothes inside out.
BEFORE STARTING TO IRON
Separate the laundry according to the types of material while checking for any
repairs to be made. Also check that all of the laundry is clean, without any stains.
FRESHENING UP CLOTHES
Adjust the required temperature with the
temperature regulator (3) of the iron. Set the
steam intensity regulator (10) on the main
body to 3. Spray steam onto the garment
hung at a distance of about 20 cm. For delicate
materials, it is recommended that you place a
clean cotton cloth over the garment before
steam spraying (Picture E).
ATTENTION!
Steam ironing is only possible at a temperature higher than .
Note: The steam regulator (10) on the main body should be set to position 3.
WARM UP (energy saving function)
Iron status LED light is flashing when the iron is warming up. When required
temperature is reached; the red LED diode lights up.
STANDBY (energy saving function)
If the iron is not in use for 30 seconds in horizontal position or 15 minutes in
• Ironing at a maximum iron temperature of 200 °C
• Dampen the material
• Ironing at a maximum iron temperature of 150 °C
• Put a damp cloth between the iron and the garment
• Ironing at a maximum iron temperature of 100 °C
• Put a damp cloth between the iron and the garment
• Textiles are not to be ironed
vertical position, it will automatically go into standby. The iron status LED light
and power LED light will flash. To re-activate the iron, just start ironing again.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zepter PWC-301 TuttoSteamy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zepter PWC-301 TuttoSteamy in the language / languages: English as an attachment in your email.

The manual is 9,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info