657586

Zepter PWC-301 TuttoSteamy Manual

15
Zoom out
Zoom in
Previous page
1/20
Next page
EN
15
21 3 4 7
8
9
5
6
Advantages of non-stick ceramic coated soleplate
• Ceramic does not stick to synthetics or fabric blended with spandex (follow
recommended temperatures)
• Ceramic does not create static electricity, so it helps keep synthetics from clinging.
• Ceramic is a good conductor of heat and this helps to distribute it evenly
across the surface it covers
NOTE: Ceramic soleplates can pick up colour from natural bres and
will become darker over time. This will not aect the functionality of
the iron.
12 IRONING
TUTTOSTEAMY IS AN EFFECTIVE REMEDY AGAINST MITES
CAUTION!
• Never use with wet hands or feet.
• Always remove the steam cleaner plug from the socket before connecting
the iron.
• The steam tube should never come into contact with the sole plate of the
iron or any sharp objects or corners.
Only place the iron on the specially-designed base.
• Never leave the iron unattended while connected to the appliance.
SUITS SHIRTS PULLOVERS
PART FUNCTION
Rubber mat Insulated protection to rest the iron on
Steam switch (Pressure key)
Steam release during ironing.
(Push- button with locking function)
Iron status LED light (red) Shows when the iron is ready for use
Iron temperature regulation DIAL
For the adjustment to the required
ironing temperature
Iron steam cable with plug For connecting to the steam cleaner
Non-stick ceramic coated
soleplate
Easier and smoother movements on
the fabric surface
1 Iron body
2 Steam locking button
3 Iron temperature
regulation dial
4 LED temperature
indicatiors
5 Steam push button
6 Iron status LED light
7 Iron power cable with
plug
8 Ceramic soleplate
9 Rubber mat
CONNECTING THE IRON
Pour the water into the boiler (see point 1 of chapter 9 “Filling with water”).
(Pictures A + B).
a) Lift the socket cover (11), ensure that the pin is turned upwards and insert
it into the socket cover opening. Plug the iron into the socket. Release the
socket cover. (picture C).
b) Connect the power cable to the power supply,turn on the main switch (4)
and the heating switch (5).
c) Set the desired temperature with the iron temperature regulator (3) (picture D).
Set the steam intensity with the steam regulator (10) on the machine to position 3.
When the green light comes on (7), it means that the iron is ready for use.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zepter PWC-301 TuttoSteamy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zepter PWC-301 TuttoSteamy in the language / languages: English as an attachment in your email.

The manual is 9,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info