657583

Zepter PWC-200 - Tuttoluxo 2S Manual

16
Zoom out
Zoom in
Previous page
1/22
Next page
EN
14
3
1 2
The appliance does not need any particular maintenance, but it is advisable to go
through the operations described below in order to ensure perfect efficiency.
After periods of intense use (check at least once every three months) it is
necessary to check the efficiency of all filtering elements.
The appliance outer surfaces can be cleaned with a cloth soaked in neutral
detergent. Should the appliance fall or overturn, switch off immediately and
disconnect from the mains.
If the machine gets in contact with water, dry it with a dry cloth and wait a few
minutes before switching on again.
Do not put away the appliance whilst the tank still contains dirty water, as this
may cause bad smells from mould and encrustations forming inside the tank.
IMPORTANT! Before carrying out any type of maintenance, turn the
machine off and disconnect from the mains.
9.1 FILTERS
The following filters should be replaced immediately if you notice any
damage to them! Contact your Zepter Service Centre for new filters.
FLOATER FILTER
This filter traps the bigger dirt (e.g. leaves) which are not kept by the rainstorm
of the Spray System
TM
and is therefore an important gate-keeper and protector
for the next filter, the Air Intake Filter.
Check the efficiency of filter.
To do this, remove the filter with the help of the float, by pushing it up against
the filter. Wash the filter element with plenty of cold water and neutral
detergent. Do not leave the filter to dry on heaters or radiators! Allow the filter
to dry naturally (not on radiators or heaters). Do not use the appliance until the
filter is perfectly dry. Use of a damp filter could damage the appliance.
As soon as stains or mould appear on the filters surface, replace them with
new ones, to be found at a Zepter Service Centre. The life of this particular
component is strongly influenced by how much the appliance is actually
being used.
AIR INTAKE FILTER
This prevents particles that have not been fully filtered by the water from
reaching the motor. Check the efficiency of filters when you are cleaning
the purification tank. To do this, remove and rinse repeatedly the two filters,
separating them from the cover and the machine body (Pict.3) with the help of
a small pliers (eyebrow tweezers will do). Wash the filter element with plenty
of cold water and neutral detergent.
Do not leave the sponge filter to dry on heaters or radiators! As soon as stains
or mould appear on the filters surface, replace them with new ones, to be
found at a Zepter Service Centre. The life of this particular component is
strongly influenced by how much the appliance is actually being used.
9 - MAINTENANCE
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zepter PWC-200 - Tuttoluxo 2S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zepter PWC-200 - Tuttoluxo 2S in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info