623346
16
Zoom out
Zoom in
Previous page
1/24
Next page
Z41 Remote
Remote Control Application for Z41 / Z41 Pro
USER MANUAL
Document Version: 1.0
www.zennio.com
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
2
CONTENTS
Contents ........................................................................................................................................ 2
Changelog ...................................................................................................................................... 3
Z41 Remote iOS Updates ...................................................................................................... 3
Z41 Remote Android Updates ............................................................................................... 4
Introduction .................................................................................................................................. 5
Installation ..................................................................................................................................... 6
iOS Installation ...................................................................................................................... 6
Android Installation............................................................................................................... 7
Main menu .................................................................................................................................... 9
Device Pairing .............................................................................................................................. 14
Controlling the Device ................................................................................................................. 16
Push Notifications ....................................................................................................................... 21
User Profiles ................................................................................................................................ 22
Troubleshooting .......................................................................................................................... 23
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
3
CHANGELOG
Z41 REMOTE IOS UPDATES
App. Version Changes Page(s)
2.0.4 Support for Z41 Pro version 1.1.0. -
1.4.7
Push notification service support.
Compatibility with Z41 3.3 and the chrono-thermostat function.
Multilanguage support.
Gas and water monitoring support.
64-bit device support.
Support for iPhone 6 and iPhone 6 Plus.
Image and icon resolution improvement.
-
1.0.14 Minor bug fixes. -
1.0.12 Security updates. -
1.0.11 Improvements in notification messages -
1.0.9
iOS 7 Support.
New icons added.
-
1.0.6
Communication security enhancements.
Usability and user interface enhancements.
-
1.0.4 Usability and user interface enhancements. -
0.2
Terms and conditions update.
New controls and indicators added.
-
0.1 Initial version. -
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
4
Z41 REMOTE ANDROID UPDATES
App. Version
Changes
2.0.6 Support for Z41 Pro version 1.1.0. -
1.5.6 Optimisation involving the Google Play Services. -
1.5.0
Push notification service support.
Graphical interface compatibility enhancement.
-
1.4.2
Z41 3.3 and Chrono-thermostat support.
Gas and water monitoring support.
Modification in energy, CO
2
and cost format.
Alphabetical sorting of device pairings.
-
1.2.2 Initial version -
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
5
INTRODUCTION
Versions 3.0 and later of Z41, as well as versions 1.1 and later of Z41 Pro, feature a
specific function for the remote control of the device, which lets the user acting over the
screen by means of remote iOS and Android based mobile devices in the same
manner as during on-site interaction.
This document is offered as a guide for integrators who are willing to configure Z41 or
Z41 Pro for being controlled from these remote applications. Hence, reading this
document together with the actual Z41 or Z41 Pro user manual is encouraged.
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
6
INSTALLATION
IOS INSTALLATION
Z41 Remote for iOS is available on the App Store. To install on an iPhone or iPad
device, please perform a search for the application and push “Download” to proceed.
Figure 1. Z41 Remote Installation from iOS device.
To install it through a PC/Mac connected to the mobile device, please enter iTunes and
access the Z41 Remote page. Next, click the “Download” button to proceed.
Figure 2. Z41 Remote Application on the App Store.
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
7
Once the application has been downloaded from iTunes, open the Apps section on the
iPhone or iPad and click the “Install” button. This action will update the button text to
“Will Install”, allowing synchronising the iTunes client with the device. To do this, just
click the “Apply” button, as shown in Figure 3:
Figure 3. Z41 Remote iOS installation from iTunes for Mac/PC
Once installed, it may be launched by clicking on its icon, which is similar to the logo
shown in Figure 2
ANDROID INSTALLATION
The Z41 Remote application is available on the Google Play Store for mobile devices
running the Android OS (versions 4.0.0 or greater).
Once the application has been found through the browser on the Google Play Store,
please click on the “Install” button, allow the download and wait for the process to
complete, as shown in Figure 4:
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
8
Figure 4. Z41 Remote installation on Android
To install the application through a PC/Mac, please log into Google Play with your
Google account, go to the application page and click the “Install” button, selecting the
device in which the application should be installed.
Figure 5. Z41 Remote installation from Google Play.
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
9
MAIN MENU
When Z41 Remote runs for the first time, the user will be shown the terms and
conditions of use:
Figure 6. Terms and conditions.
After agreeing with the terms, the main window of the application will show up, as in
Figure 7:
Figure 7. Main window on iOS / Android.
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
10
Four main elements can be identified:
Device list: list of the devices already linked to the application through the
pairing procedure. This list shows no elements on the first execution.
Add device: button that brings up the Device Pairing window (see below).
Note: the Android version of the Z41 Remote application provides an additional
button, , which also allows new pairing creation, as shown in Figure 7.
Preferences: button that brings up the application settings, where the
following options can be set:
Figure 8. Preferences.
Key press sound: enables or disables the beeps emitted by the
application when the user remotely touches any of the Z41 (or Z41 Pro)
buttons.
Password: enables or disables the application start-up password
protection. When enabled, the application will be only accessible by users
knowing the password.
Note: if the password protection is active and the user types it wrong for three
consecutive times during the start-up, the application will remain locked for 60
seconds prior to permitting further attempts. The user will be notified about this
through a warning message and a countdown indicator.
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
11
After enabling this function, a pop-up dialogue will be displayed to enter
the desired password (any combination of four digits). Entering the
password a second time will be required in order to confirm it.
Figure 9. Password selection.
Note: to disable the password protection, the user will be required to type the
password currently in use.
About: displays a window containing information about the application
(version, identification of the manufacturer, etc.) which also lets the user
review the terms and conditions of use again.
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
12
Figure 10. “About” window.
Note: the Android version of the Z41 Remote application requires pressing on ,
which is located in the upper right corner, in order to gain access to this feature, as
shown in Figure 11
.
Figure 11. Z41 Remote Android Preferences and about menú.
Order alphabetically: by selecting this option the device list will be displayed
alphabetically sorted instead of using the default, last-accessed criteria. This
feature is available only on the Android version.
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
13
User Code and IP: these fields are reserved for use upon Zennio’s request.
Please, refer to User Profiles section for further information.
Note: User Codeon iOS devices can be found under the Main Configuration > “Z41 Remote”
section, as shown in Figure 12.
Figure 12. User Code on iOS devices.
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
14
DEVICE PAIRING
Once in the main window (Figure 3), the user may add as many Z41s as desired, by
tapping on the Add Device button. A new pop-up window will open next, as in Figure
13.
Figure 13. Add device.
Pairing the application to a certain Z41 or Z41 Pro requires filling the following fields:
Name: text string that will identify the particular device within the entire device
list shown by the application. Any name will be accepted although it is
encouraged to select a name descriptive enough, particularly if planning to
link multiple devices to the application.
Note: a longer description for the device being paired to the application. Note
that while in the device list of the main window (Figure 7), it is possible to
retrieve the descriptive note of any of the already linked (Figure 17).
Device: name of the mobile device where the remote Z41 or Z41 Pro is being
registered. By default, it will match the device name set by the user in the iOS
settings or the one set by the manufacturer in the Android OS, although a
different name can be set if desired. Once the pairing process ends, and for
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
15
confirmation purposes, Z41 (or Z41 Pro) will show on screen the name of the
mobile device (according to the value of this field) it has just been paired to,
as shown in Figure 14.
Figure 14. Successful Z41 pairing.
Code: univocal pairing code that will let the mobile device identify the
particular Z41 or Z41 Pro it must link to. This code needs to be obtained from
the latter, which will display it on screen after requesting it from the pairing
code service, as depicted in Figure 15 and described in “Pairing Procedure”
under the Annex I of its User Manual.
Figure 15. Z41Pairing code introduction.
Once the above parameters are set, the user must press on Save.
Z41 Remote
http://www.zennio.com Tecnical Support: http://support.zennio.com
16
Note: on Android, saving is performed by pressing on .
Unless there are communication errors between the mobile device and Z41 or Z41 Pro,
the device list in the main window of the application will now include the device that has
just been linked:
Figure 16. Paired device.
CONTROLLING THE DEVICE
From the device list in the main window, the user can access a panel with detailed
information referred to a particular Z41 or Z41 Pro (including the date of the last time it
was accessed from this particular mobile device) by pressing icon next to the
device. The pop-up panel will look similar to Figure 17 and will also give the user the
option to modify the name and the note assigned to the device as well as deleting the
pairing, after which it will be removed from the list of the already-paired devices.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Remote at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Remote in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio Z41 Remote

Zennio Z41 Remote User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info