623342

Zennio Z41 Pro Touch Panel Manual

44
Zoom out
Zoom in
Previous page
1/96
Next page
Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
44
Note: a list with all icons available in Z41 Pro can be found in document “Z41
Pro Icon list”, available at www.zennio.com.
c) Scene Control
In this case, the central button of the box will react to user presses by sending
a scene value to the KNX bus through the [General] Scenes: send object,
which is enabled by default. Parameter Scene number permits specifying the
number of the scene (1 – 64) to be sent. Moreover, Action (which shows the
options “Run” and “Run and save”) sets whether the device will only send
scene execution orders (after a short press) or if it will be possible, in addition
to sending execution orders upon short presses, to send scene save orders in
the case of a long press.
Figure 42 Scene control
Finally, the dropdown list next to Button (in the middle) permits selecting an
icon to be displayed inside the button.
Note: a list with all icons available in Z41 Pro can be found in document “Z41
Pro Icon list”, available at www.zennio.com.
3.4.2.3 2-BUTTON CONTROL
Figure 43 2-button control (Box)
Boxes configured as 2-button controls consist in an indicator and two buttons that,
when touched, trigger the sending of an action to the KNX bus through a certain object.
This category also includes some specific controls such as light dimming and shutter
control.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Pro Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Pro Touch Panel in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info