623342

Zennio Z41 Pro Touch Panel Manual

43
Zoom out
Zoom in
Previous page
1/96
Next page
Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
43
• Hold 0 – Release 1: one “0” will be sent when the button press starts,
and one “1” as soon as the button is released.
• Hold 1 – Release 0: one “1” will be sent when the button press starts,
and one “0” as soon as the button is released.
Finally, the dropdown list next to Button (in the middle) permits selecting the
icon to be displayed inside the button.
Note: a list with all icons available in Z41 Pro can be found in document “Z41
Pro Icon list”, available at www.zennio.com.
b) Numerical Constant Controls
If the box is assigned any of the remaining “constant” control options, the
central button in the box will react to user presses by sending a certain
numerical value, which is required to be specified under Constant value.
Figure 41 1-byte constant (unsigned int)
Table 2 shows, for every available Function, the permitted value range and the
name of the object through which the values are sent to the bus.
Function Range Object
1-byte constant (unsigned int.) 0 – 255 [Pn][Bi] 1-byte unsigned int control
1-byte constant (signed int.) -128 – 127 [Pn][Bi] 1-byte signed int control
Constant percentage value 0% – 100% [Pn][Bi] Percentage control
2-byte constant (unsigned int.) 0 – 65535 [Pn][Bi] 2-byte unsigned int control
2-byte constant (signed int.) -32768 – 32767 [Pn][Bi] 2-byte signed int control
2-byte constant (float) -671088.64 – 670760.96 [Pn][Bi] 2-byte float control
Table 2 Numerical constant controls
Finally, the dropdown list next to Button (in the middle) permits selecting an
icon to be displayed inside the button.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Pro Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Pro Touch Panel in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info