623342
14
Zoom out
Zoom in
Previous page
1/96
Next page
Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
14
programming mode as by pressing the actual programming button of the
device (see section 1.3) in case the rear side of Z41 Pro cannot be accessed.
Reset: holding this button for a few seconds (i.e., a long press is required)
sets the device back to a certain state, which can be set in ETS:
ETS Reset Device: similar to restoring the device to the just-parameterised
state, with the subsequent reset of the object values, alarm controls, timers,
etc.
Z41 Reboot: simple device reset, with no data loss (zeroing).
ETS Reset Device and Z41 Reboot: the above two, combined.
Note: alarm logs, consumption logs or any other historic logs are not reset to
zero in any case (such thing takes only place after a firmware download; see
section 1.3.1). Nevertheless, the “ETS Reset Device” option does reset any
adjustment performed by the final user from the Profile and Configuration
pages (excepting the time / date, which is controlled by an internal clock).
Alarm Log: log file where alarm events will be incorporated as soon as they
occur. This centralised file may be useful when the user needs to check the
status of a set of alarm controls distributed across several pages.
Figure 9 Alarm Log
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Pro Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Pro Touch Panel in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info