Manual Zennio Roll-ZAS Touch Controller (page 33 of 54) (English)

623347

Zoom out

Zoom in

1/54

Roll-ZAS

http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com

the touch panel (the first one on the left). The current contrast level will then

be shown; to increase it, just press the up arrow button, and to decrease it,

the down arrow button.

Light: adjusts the luminosity level of the ZAS display (value between 1 and

10). To modify this level, just press the button corresponding to the

Luminosity in the touch panel (the first one on the right). The current

luminosity level will then be shown; to increase it, just press the up arrow

button and to decrease it, the down arrow button.

Time: sets the time of the clock. Format is "hh:mm". To modify it, just press

the button corresponding to Time in the touch panel (the second one on the

left). The current time will be shown; the first thing to be modified is the hour,

by means of the Arrow buttons. Then, the OK button or the Time button itself

will confirm the hour value and move the focus to the minutes, which can be

adjusted with the Arrow buttons. To confirm the minutes, just press the OK or

the Time buttons again.

Note: bus power failures may introduce delays, as the internal clock needs

power to work. In such case, the clock should be set to the correct time once

the bus power returns.

Calibration: pressing this button will bring back the calibration page (please

refer to Figure 4 for the calibration sequence). A re-calibration may be

necessary when the initial calibration has not been carried out properly after

downloading the application and therefore the detection of button presses is

behaving unexpectedly.

Programming LED: when the physical address of the device needs to be

downloaded, it is possible to enter the programming mode directly by short-

pressing this button. This feature overcomes the need for accessing the rear

side of the panel to physically push the programming button. While the

programming mode is active, the LED associated to this button in the

Configuration page will stay on. To leave the programming mode, just short-

press this button again (the programming LED and the button LED will be

switched off).

Reset: a long press of at least 3 seconds will reset all the stored values and

will set ZAS to the initial state it had after the last download performed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Roll-ZAS Touch Controller in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio Roll-ZAS Touch Controller

Zennio Roll-ZAS Touch Controller User Manual - German - 49 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zennio Roll-ZAS Touch Controller Manual

Product: